Purpose; Field Of Application - Siemens SIPROCESS GA700 Operating Instructions Manual

Continuous gas analysis
Hide thumbs Also See for SIPROCESS GA700:
Table of Contents

Advertisement

Introduction

1.4 Field of application

1.3

Purpose

The device is designed for the concentration analysis of gases in gas mixtures. Depending on the
installed analyzer module, different gases can be examined.
Use the device only for measuring/analysis of gas concentrations in gas mixtures according to
the information in section "Technical specifications (Page 117)".
Note
Aggregate state of examined substances
The system can only be used for gaseous samples.
Note
This device meets the requirements of NAMUR Recommendation 53.
Note
Use in home environment
This equipment of Class A Group 1 is intended solely for use in industrial areas.
If used in homes, the device may cause radio interference.
Note
For more information on the compatibility of the hardware and firmware, refer to:
Siemens Industry Online Support (https://support.industry.siemens.com/cs/de/en/ps/17731).
You will find more information in the operating instructions, see
"References (Page 135)".
1.4
Field of application
These operating instructions only describe non explosion-proof SIPROCESS GA700 rack-
mounted devices. You can find information on explosion-proof SIPROCESS GA700 devices in the
compact operating instructions "Devices in explosion-proof version", see Table A-6 References 5 -
Compact Operating Instructions Ex (Page 136).
A SIPROCESS GA700 rack-mounted device comprises a housing into which up to two
exchangeable analyzer modules can be inserted. The rack-mounted device is suitable for
installing in a control cabinet or in a frame. The analyzer modules are selected according to the
measuring task and local conditions.
The standard analyzer modules OXYMAT 7, ULTRAMAT 7 and CALOMAT 7 are available for rack-
mounted devices.
8
Rack-mounted device
Operating Instructions, A5E31874006-12

Advertisement

Table of Contents
loading

Table of Contents