Table of Contents
Advertisement
32"/ 43" Series:
1.
Remove all fixation screws [2] and [3] that secure the Back cover assy.
2.
Unplug the connector [4 and [5] ]that marked by red box below from SSB, and remove the wires from the hook in red circle as below picture
3.
Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set.
2
2
2
4
3.2.3 IR board Control Unit
24" series
1.
Remove all fixation screws [1] that secure the Back cover assy, and [2] that secure the IR lens
2.
Unplug the connector [3] from the IR board，then take out the IR board.
When defective, replace the whole unit.
2
2
5
2
(32"&43" series)
2
3
2
2
2
2
- Quick Links:
- Circuit Diagrams
Hide quick links:
Advertisement
Table of Contents
