Pioneer BDP-170 Service Manual page 18

Blu-ray 3d player

Hide thumbs Also See for BDP-170:

Table of Contents

3. Confirming the Destination Change

Check if the destination setting has been properly changed.

1 Press the HOME MENU button to display the HOME

MENU screen, move the cursor to Initial Setup, then

press the ENTER button.

2 With the Initial Setup screen displayed, press the numeric

buttons 8, 5, 2, then 0, in that order, on the supplied

remote control unit.

3 On the BUDA Information screen, if the destination

that was selected on step 4 in "2. Changing the

Destination Setting" is displayed for the "Model" item,

destination change has been successfully finished.

Tip: It is recommended to confirm the region code at

the same time.

4 Press the HOME MENU button to return to the HOME

MENU screen.

4. Writing the Latest Firmware to the Product

1 Download the latest firmware for the product from the Website specially for service engineers to a USB storage

device.

2 Perform updating in the same manner as that described in 1-1.

3 Check that the latest version of the firmware is installed, by selecting Initial Setup > Option > System Information,

in that order.

Caution: Be sure to write the latest firmware that suits the destination of the product,

because the product will not operate properly with the firmware for service,

which is used for changing the destination setting.

BDP-170

Table of Contents

Bdp-80fd