Table of Contents
Advertisement
Model 10722A
Instruction Manual
INSTALLATION AND OPERATION
INTRODUCTION
This section provides installation and operating instructions for the 10722A Plane Mirror Converter.
UNPACKING AND INSPECTION
Prior to shipment, this instrument was inspected and met all specifications listed in Table 1.
Inspect the shipping container and, if damaged, remove and inspect the Plane Mirror Converter.
If the Plane Mirror Converter is damaged, file a claim with the camer and notify Hewlett-
Packard immediately.
INSTALLATION
To mount the 10722A Plane Mirror Converter to the 10702A Linear Interferometer, use two 4-40 cap
screws supplied with the Plane M i ~ o r Converter. The Plane Mirror Converter must be mounted to one
of the two outlet ports of the Linear Interferometer. The outlet ports of the Linear Interferometer are
indicated by the direction of the arrows located on the side. Figure 3 illustrates the correct mounting
configurations of the Plane Mirror Converter.
Figure 3. Plane Mirror Mounting
PLANE MIRROR CONVERTER
l NPUT
BEAM
Page 3
Advertisement
Table of Contents
