Specifications; Specific Safety Rules - Makita 6305 Instruction Manual
Hide thumbs
Also See for 6305:
- Instruction manual (45 pages) ,
- Technical information (8 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
1-1. Lock button
1-2. Switch trigger
2-1. Indicator lamp
3-1. Tool barrel
3-2. Side grip (auxiliary handle)
4-1. Bit
4-2. Chuck
4-3. Chuck key
SPECIFICATIONS
Capacities
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for drilling in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-1:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
The
vibration
total
determined according to EN60745-2-1:
Work mode: Drilling into metal
Vibration emission (a
EC-DECLARATION OF CONFORMITY
Model; 6305
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
Explanation of general view
5-1. Depth gauge
5-2. Stopper holder
5-3. Concave
5-4. Convex
5-5. Side grip (auxiliary handle)
6-1. Side grip (auxiliary handle)
6-2. Depth gauge
7-1. Depth gauge
Model
Steel
Wood
-1
)
Overall length
Net weight
Safety class
) : 84 dB(A)
pA
value
(tri-axial
vector
2
) : 2.5 m/s
or less
h,D
ENE032-1
000230
ENF002-1
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
ENG101-1
8JD, ENGLAND
SPECIFIC SAFETY RULES
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to drill safety rules. If you use this power tool
unsafely or incorrectly, you can suffer serious
personal injury.
ENG202-1
1.
Use auxiliary handles supplied with the tool.
sum)
Loss of control can cause personal injury.
2.
Hold power tools by insulated gripping
surfaces when performing an operation where
the cutting tool may contact hidden wiring or
ENH101-8
its own cord. Contact with a "live" wire will make
exposed metal parts of the tool "live" and shock
the operator.
3.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4.
Hold the tool firmly.
5.
Keep hands away from rotating parts.
3
7-2. Protrusions
7-3. Teeth
7-4. Side grip (auxiliary handle)
10-1. Limit mark
11-1. Screwdriver
11-2. Brush holder cap
6305
13 mm
30 mm
1,300
346 mm
2.6 kg
/II
CE2007
Tomoyasu Kato
Director
GEB001-2
Advertisement
Table of Contents
