wireless infrastructure
Most wireless networks communicate in infrastructure
mode. To configure the media receiver network settings
for wireless infrastructure and DHCP dynamic
addressing:
1. Press options
2. Select Network Setup
3. Set Connection to Wireless (Infrastructure)
4. The receiver will scan for wireless local area
networks (WLan). Select WLan to choose your
wireless network if it is not already chosen.
5. Select Address
6. Set Configuration to DHCP
TV
7. Press left arrow to return to receiver options
8. Select Apply Changes to apply the network
changes
After restarting, verify the media receiver is able to
view photos and play music.
wireless ad hoc
In Ad Hoc mode, an access point does not exist and
the media receiver communicates directly with
computers containing wireless network cards. It is
similar to a static network, without wires.
You will need to assign a static address to the media
receiver that is appropriate for your network. Use the
TV
user's guide
41