Advertisement
Precautions
If this unit is installed incorrectly, personal injury or
damage to peripheral items may occur due to fire,
shock, or other accidental circumstances. To avoid
such risks, installation should be performed by
qualified service technicians.
To technician installing the unit
Before installing this unit, please refer not only to the
manual for the unit but also to the Operation Manual
supplied with the CCU-550/550P.
Introduction
This product is a DC Power Unit designed to be
installed in the CCU-550/550P Camera Control Unit.
Instructions about operation,
installation, and connection
For instruction about operation, installation, and
connections of the camera control unit after installing
this unit, refer to the Operation Manual supplied with
the CCU-550/550P Camera Control Unit and the
System Manual (optional).
For the customers in U.S.A.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residen-
tial area is likely to cause harmful interference in which case
the user will be required to correct the interference at his or
her own expense.
Installation
1
Remove the top panel of the CCU-550/550P.
1 Remove the four screws on the right side
panel.
2 Remove the three screws on the left side panel.
3 Lift off the top panel.
For the purchasers of the CCU-550P
Use the supplied hexagon wrenches to remove the
screws of CCU-550P.
(Continued on the reverse side)
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
The shielded interface cable recommended in this manual
must be used with this equipment in order to comply with
the limits for a digital device pursuant to Subpart B of Part
15 of FCC Rules.
Für Kunden in Deutschland
Dieses Produkt kann im kommerziellen und in begrenztem
Maße auch im industriellen Bereich eingesetzt werden.
Dies ist eine Einrichtung, welche die Funk-Entstörung nach
Klasse B besitzt.
Advertisement
