Bosch IVS-SLIM Installation Manual page 21

Hide thumbs Also See for IVS-SLIM:

Table of Contents

4) Adhere the device onto the vehicle windshield

 IMPORTANT:

Before adhering the device onto the windshield, please check in the

Customer

Dashboard, if the device connects to the Bosch backend (tab: 'Fleet Overview')

– therefore you can use your cell phone or your laptop

 Prepare the surface: With the provided alcohol wipe, clean the windshield surface in the

intended installation area and let it dry completely.

 Locate the device on the windshield: The device is placed on the passenger side of the

overhead console or rear-view mirror, roughly 50mm from both the console/mirror and

50mm from where the windshield meets the headliner. Depending on the size of the

installer's hands, 2-3 finger's width can be used to approximate this distance. Compliance

with the applicable standards can no longer be guaranteed if the device is mounted more

than 50mm below the edge of the headliner.

Cross-Domain Computing Solutions | 2022-01-27

Table of Contents