Table of Contents
Advertisement
Finish in time
Drying duration or automatic
drying
Rinse cycles
12
Increases in time occur because of:
– additional rinse cycle if excessive foam is in the
laundry,
– multiple spinning if the laundry is distributed poorly
in the drum,
– increased heating times, e.g. when the water is too
cold,
– water pressure too low,
– selection of an additional option, e.g. Rinse Plus
' and/or Wash Plus È after the programme has
started,
– very absorbent washing extends the heating
duration,
– the laundry for drying is wet.
You can select the finish in time, see page 33.
You can set the drying duration or automatic drying by
touching the Dry ˆ button, see page 29. When the
washing and drying without a break was selected, time
drying or auto drying duration will add in programme
duration automatically. Related programmes will
prolong 5-15 minutes for good washing performance.
On if there is (are) rinse cycle(s) with the selected
programme or "Rinse Plus '" was selected. The sym-
bol means "default rinse cycle(s) + selected
additional rinse cycle" by touching the "Rinse Plus '"
button.
Hide quick links:
Advertisement
Table of Contents
