Removal and Replacement Procedures
✎
Before disconnecting the cables, make note of which wireless
antenna cable is attached to which antenna clip on the Mini
PCI communications card.
7. Disconnect the wireless antenna cables 1 from the Mini PCI
communications card.
8. Spread the two retaining tabs 2 that secure the Mini PCI
communications card to the communications compartment
socket. (The front edge of the board rises up).
9. Remove the wireless communications card 3 by pulling the
board away from the socket at a 45-degree angle.
✎
Mini PCI communications cards are designed with security
slots 4 to prevent incorrect installation into the Mini PCI
socket.
Removing a Mini PCI Communications Card
Reverse the above procedure to install a Mini PCI
communications card.
5–18
Maintenance and Service Guide