Table of contents Introduction �������������������������������������������������3 5 Wireless projection with Android devices �����������������������������������11 Dear customer ...............3 6 Wireless projection with About this user manual ..........3 iOS devices ������������������������������������������ 12 What’s in the box ............3 7 Connect to wireless speaker ������������ 13 Product highlights ............3 General safety information ���������������...
Introduction What’s in the box NeoPix Prime One projector (NPX535/INT) Dear customer Remote control with 2 AAA batteries A/C power adapter Thank you for purchasing this projector. Lens cover We hope you enjoy this product and the many Quick Start Guide...
If the product gets too hot or emits smoke, shut it down immediately and unplug the power cable. Have your product checked by an authorised service centre. Keep the product away from open flames (e.g. candles). Philips · NeoPix Prime One...
2 Overview Power supply Use only a power adapter which is certified for this product (see Technical data, page 19). Top view Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This product complies with the voltage type specified on the product.
Connect to a USB storage device for media Access the home menu. play. Confirm a selection or entry. Connect to the power supply. Return to a previous menu screen. Increase or decrease volume. Mute or restore volume. Access the home menu. Philips · NeoPix Prime One...
3 Initial operation Navigation buttons • Navigate menu options. • Press / to change a selection. Placing projector • Switch the projector on or off. You can install the projector in 3 different • When the projector is switched on, the configurations.
Connect the power adapter with the power cable to the socket on the projector, and then to the wall outlet. • The LED on the projector turns red. MICRO SD HDMI 1 HDMI 2 Philips · NeoPix Prime One...
Preparing the remote Power on and setup control Press to turn on the projector. The LED on the projector turns from red to white. CAUTION! • To turn off the projector, press again. The improper use of batteries can The LED on the projector turns from lead to overheating, explosion, risk of white to red.
Many laptops do not activate the external video output automatically when you connect a second display such as a projector. Check your laptop user manual to find out how to activate the external video output. Philips · NeoPix Prime One...
5 Wireless Notice AUX connection only works through VGA projection with connection. Android devices Connecting to external speakers or headphones What you need Connect external speakers or headphones to • An Android device which supports Miracast the projector. With this connection, audio from (or Screen Mirroring).
On your iPhone, access ‘Control Center’ by sliding the screen up, and select the ‘Screen Mirroring’ option. Then select the projector name under ‘Screen Mirroring’ to connect your iPhone to the projector. Philips · NeoPix Prime One...
7 Connect to 8 Media playback wireless speaker This section helps you use the projector to play media from a wide range of sources. Notice Through Bluetooth, you can stream music wirelessly from the projector to a Bluetooth The projector supports a USB storage speaker.
Fast search backward or forward • Pause or resume play • Stop play • Select a play mode: play only the current file/repeat all/repeat one Select a control function and press OK to trigger the control. Philips · NeoPix Prime One...
9 Change settings Notice The projector cannot connect to a smartphone or tablet for streaming This section helps you change the settings of music through Bluetooth. the projector. Picture settings Language settings Press Press Select Settings, and then press OK. Select Settings, and then press OK.
Check the latest software version on Use a soft brush or lens cleaning paper for www.philips.com/support. Find your cleaning the lens of the projector. product (model number: NPX535/INT), and locate ‘Software and drivers’. DANGER! Download the software into the USB flash Do not use any liquid cleaning agents! drive.
Page 17
Problems Solutions The projector cannot be turned on. • Disconnect and reconnect the power cable, and try to turn the projector on again. The projector cannot be turned off. • Press and hold longer than ten seconds. If this does not work, disconnect the power cable. No image from the external HDMI device.
Page 18
What to do if the projector does not work • Check that the HDMI cable is plugged in correctly. when connecting to a notebook PC? • Make sure that the notebook PC has been switched to projector display. Philips · NeoPix Prime One...
11 Appendix Connection Wireless standard ........802.11b/g/n operated frequency band 2.4 G Technical data (13 channels) Bluetooth V4.2 ......2400 - 2483.5 MHz Technology/optical stream music from the projector to external Display technology ..........LCD speaker via Bluetooth Light source .............LED Connectivity....2 x HDMI, VGA, USB (2.0), MicroSD card slot, AUX in (3.5 mm), Resolution ........1280 ×...
Page 20
• Adjust or relocate the receiving antenna. Philips · NeoPix Prime One...
Page 21
Packaging: The presence of the logo other than those designated as original (green edot) means that a contribution is Screeneo Innovation SA/PHILIPS products or paid to an approved national organisation Screeneo Innovation SA/PHILIPS approve d to improve package recovery and recycling products.
Page 22
Screeneo Innovation SA Route de Lully 5C, 1131 Tolochenaz Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. Screeneo Innovation SA is the warrantor in relation to the product with which this booklet was packaged.