Husqvarna T540i XP Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Chainsaw
  5. T540i XP
  6. Operator's manual

Husqvarna T540i XP Operator's Manual

Hide thumbs Also See for T540i XP:
Table of Contents

Advertisement

Quick Links

®
T540i XP
EN
Operator's manual
2-31

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna T540i XP

Summary of Contents for Husqvarna T540i XP

  • Page 1 ® T540i XP Operator's manual 2-31...

  • Page 2: Table Of Contents

    Contents Introduction..............2 Transportation, storage and disposal......26 Safety................4 Technical data.............. 27 Assembly..............12 Accessories..............28 Operation..............13 Declaration of Conformity..........31 Maintenance..............18 Registered trademarks..........31 Troubleshooting............26 Introduction Intended use Product description This product is for professional tree maintenance such This product is a chainsaw model with an electric motor.
  • Page 3 5. Battery indicator level of the product is specified in Technical data on page 27 and on the 6. SavE button label. 7. Information and warning decal 8. Top handle 9. Belt eyelet 10. Rope eyelet Use approved protection for feet, legs, 11.

  • Page 4: Safety

    This saw should only be used by persons who are specially trained in tree maintenance work. See operator's manual! Fail-safe transformer. The rating plate or the la- yyyywwxxxxx ser printing shows the se- rial number. yyyy is the Use and keep the battery charger indoors production year, ww is the only.
  • Page 5 • Keep children and bystanders away while operating • If devices are provided for the connection of dust a power tool. Distractions can cause you to lose extraction and collection facilities, ensure these are control. connected and properly used. Use of dust collection can reduce dust-related hazards.
  • Page 6 make a connection from one terminal to another. surface. Slippery or unstable surfaces may cause a Shorting the battery terminals together may cause loss of balance or control of the chain saw. burns or a fire. • When cutting a limb that is under tension, be alert for •...
  • Page 7 • Turn to your servicing dealer or Husqvarna if you have questions about the operation of the product. We can give you information about how to operate your product correctly and safely. Go to a training class in chainsaw operation if possible.
  • Page 8 • Do not hold the product with one hand. This product skin colour or condition. These symptoms usually is not safely controlled with one hand. occur in the fingers, hands or wrists increases in cold temperatures. • Hold the product tightly with your right hand on the top handle and your left hand on the front handle.
  • Page 9 • If the safety devices are defective, speak to your Husqvarna servicing dealer. Functions of the user interface The user interface includes the start/stop button, the SavE button, the battery status and the warning indicator.
  • Page 10 zone is nearer you, the chain brake engages manually The front hand guard also decreases the risk to touch by your left hand. the saw chain if your hand lets go of the front handle. In the felling position you cannot engage the chain brake manually.
  • Page 11 Safety instructions for maintenance • Keep the correct depth gauge setting. Obey the instructions and use the recommended depth gauge WARNING: setting. Too large depth gauge setting increases the Read the warning risk of kickback. instructions that follow before you do maintenance on the product.

  • Page 12: Assembly

    Assembly To assemble the guide bar and saw 4. Steer the guide bar to its most rear position. Lift the saw chain above the drive sprocket and engage it in chain the groove on the guide bar. Start on the top edge of the guide bar.

  • Page 13: Operation

    3. Do a check of the keypad to make sure that it Husqvarna Connect is a free app for your mobile device. operates correctly. The Husqvarna Connect app gives extended functions 4.
  • Page 14 • Use Husqvarna chain oil for maximum saw chain life and to prevent negative effects on the environment. If Husqvarna chain oil is not available, we recommend you to use a standard chain oil.
  • Page 15 the product. Second, the force of the kickback must 4. Push on the lower part of the battery until you hear a be large to engage the chain brake. If the chain click. brake is too sensitive, it can engage during rough operation.
  • Page 16 2. Push the battery release buttons and remove the • To cut on the push stroke is when you cut with the battery from the battery holder to prevent accidental top of the guide bar. The saw chain pushes the start.
  • Page 17 4. Make sure that there is a carabiner on the other end of the safety strop. CAUTION: The safety strop must only be attached to the rope eyelet. 3. Make sure that you are in a stable and safe position to make the cut.

  • Page 18: Maintenance

    To remove a trapped product • Do a check of the harness, belt and ropes at a regular interval. 1. Stop the product. • If you must climb with the product, attach the product to the rear connection point on the harness. The rear 2.
  • Page 19 Maintenance Before Weekly Monthly Clean the air inlet on the product. Make sure that the screws and nuts are tight. Make sure that the keypad works correctly and that it is not damaged. Use a file to remove burrs from the edges of the guide bar. Do a check of the connections between the battery and the product.
  • Page 20 To do a check of the power trigger lockout 2. Make sure that the chain catcher is stable and attached to the body of the product. 1. Make sure that the power trigger and power trigger lockout move freely and that the return spring operates correctly.
  • Page 21 A saw chain that does not move can also cause injuries. Replace a worn or damaged guide bar or saw chain with the guide bar and saw chain combination recommended by Husqvarna. This is necessary to keep the safety 1036 - 008 - 04.11.2021...
  • Page 22 It is not easy to sharpen a saw chain correctly without through the wood. If the saw chain is very blunt, there the correct equipment. Use Husqvarna file gauge. This will be no wood chips but sawdust. will help you to keep maximum cutting performance and A sharp saw chain eats through the wood and the wood the kickback risk at a minimum.
  • Page 23 1. Use a flat file and a depth gauge tool to adjust the depth gauge setting. Only use Husqvarna depth gauge tool to get the correct depth gauge setting and 4. Remove material from one side of all the cutting bevel for the depth gauge.
  • Page 24 3. Tighten the saw chain until it is tight against the 2. If the saw chain lubrication is correct, you will see a guide bar. clear line of oil on the surface less than 1 minute. 4. Tighten the bar nut with the combination wrench and lift the front of the guide bar at the same time.
  • Page 25 To do a check of the chain drive To do a check of the guide bar sprocket 1. Make sure that the oil channel is not blocked. Clean if it is necessary. • Examine the chain drive sprocket for wear. Replace the chain drive sprocket if it is necessary.

  • Page 26: Troubleshooting

    7. Turn the guide bar daily to extend its life cycle. • Turn the adjustment screw for the oil pump. Use a screwdriver or the combination wrench. To adjust the chain oil flow WARNING: a) Turn the adjustment screw counterclockwise to Stop the motor before you increase the oil flow.

  • Page 27: Technical Data

    Note: The symbol shows on the product or package of prevent injuries or damage on the product during the product. transportation and storage. Technical data Technical data T540i XP Motor Type BLDC (brushless) 36V Features Low energy mode savE Lubrication system...

  • Page 28: Accessories

    Guide bar and saw chain combinations The following cutting attachments are approved for Husqvarna T540i XP. Equivalent sound pressure level, according to ISO 22868:2011, is calculated as the time-weighted energy to- tal for different sound pressure levels under various working conditions. Typical statistical dispersion for equiv- alent sound pressure level is a standard deviation of 1 dB (A).
  • Page 29 The part numbers are given in the table below. Using Husqvarna file gauge will give you the correct If you do not know which saw chain you have on your filing angles. We recommend you to always use a product, turn to your servicing dealer.
  • Page 30 Battery charger QC500 Power, W 1036 - 008 - 04.11.2021...

  • Page 31: Declaration Of Conformity

    In addition, RISE SMP, Svensk Maskinprovning AB, Box Husqvarna T540i XP from 2020’s serial numbers and 7035, SE-750 07, Uppsala, Sweden , Sweden, has onwards (the year is clearly stated in plain text on the...
  • Page 32 Original instructions 1141157-26 2021-11-09...

This manual is also suitable for:

540i xp

Table of Contents