Room Name Setting; Contact Information Registration - Hitachi PC-ARFG-E Installation & Operation Manual
Wired remote controller
Hide thumbs
Also See for PC-ARFG-E:
- Instruction manual (164 pages) ,
- Installation & operation manual (105 pages) ,
- Instruction manual (12 pages)
Table of Contents
Advertisement
SERVICE & INSTALLATION MENU
6.2.8 Room Name Setting
Register the installation location of the controller.
1 Select "Service Menu" on the "Service & Installation" screen
and press "OK".
2 Select "Set Room Name" and press "OK".
3 Press " " to move cursor to font type. Press " " or " " to
select the font type. Each time you want to change the font
type, move cursor to the first character on the fist line at the
upper left corner of the screen, then press " " to select the
font type.
4 Press " " to move the cursor to the font area. Press" ", " ",
" ", or " " to select the font and press "OK" to register it (up to
32 characters can be registered).
5 After registration, select "
6 The confirmation screen is displayed. Select "Yes" and press
"OK" to confirm the settings and Step2 is displayed.
If "No" is selected, the screen returns to Step3.
Font type
79
PMML0565 rev.1 - 04/2022
Fin
" and press "OK".
Font area
6.2.9 Contact Information Registration
Register a service contact (service address and service
telephone number are recommended).
1 Select "Service Menu" on the "Service & Installation" screen
and press "OK".
2 Select "Set Contact Information" and press "OK".
3 "Contact Information1" screen is displayed. Press " " to move
cursor to font type. Press " " or " " to select the font type.
Each time you want to change the font type, move cursor to
the first character on the fist line at the upper left corner of
the screen, then press " " to select the font type.
4 Press " " to move cursor to the font area. Press" ", " ", " ",
or " " to select the font and press "OK" to register it (up to
60 characters can be registered).
5 After registration, select "
6 "Contact Information2" screen is displayed, repeat Step3,
Step4 and Step5.
7 Select "Yes" and press "OK" to confirm the setting and Step2
is displayed.
If "No" is selected , the screen returns to Step3.
Fin
" and press "OK".
Advertisement
Table of Contents
