Table of Contents Features ..............3 Parts Identification ........... 4 Power Supply ............. 5 Installing the Batteries ........... 5 Attaching the Supplied Accessories ......6 Replacing the Identification Ring ......6 Setting the Transmission Channel ......7 Selecting the Group/Channel ......... 7 Using the Cross Remote ..........
Interchangeable microphone capsule Features Coupled with a Sony microphone capsule unit (not supplied), the DWM-02N can be used in vocal performances, interviews, speeches, and a variety of other applications. You can mount a microphone capsule unit by The DWM-02N is a digital wireless microphone that...
d Antenna cover Parts Identification Holds the antenna for RF transmission and wireless remote control function. e POWER indicator Lights up green when the microphone is turned on. When the battery is exhausted, the indicator starts flashing. f USB connector (Micro USB) Use this connector to connect an optional USB keyboard to Inside the grip...
• When BATTERY TYPE is set to TYPE1, the power status is indicated based on the use of new LR6 (size AA) Sony Alkaline batteries. An incorrect indication may result when a different kind of batteries, a different brand of batteries or old batteries are used. If you plan to...
• If you plan to use the microphone for a long period of Attaching the Supplied time, it is recommended that you replace the batteries with brand new ones. Accessories For details on BATTERY TYPE setting, see “Setting the Battery Type (BATTERY TYPE)” on page 13. Replacing the Identification Ring A black ring is attached at the factory.
Set the microphone group (GP) and channel (CH) as follows: For details on groups and channels, refer to “Sony Digital Wireless Microphone System Frequency Lists” on the supplied CD-ROM. For details on menu operation, see “Basic Menu Operations”...
When pairing has been established, the wireless Using the Cross Remote remote control condition level (indicated by goes up, RF REMOTE turns on, and the remote control function becomes operative. This microphone is equipped with a wireless remote When “Pairing fail” is displayed control function that can be used to set the parameters (low-cut filter, attenuation operation, power save mode, •...
• When pairing fails (“Pairing fail” is displayed), Using the Encrypted successful communication between the microphone and the receiver has not occurred within a given amount of Transmission Function time. Pairing may be harder to do when another receiver is engaged in pairing nearby. •...
Set the same password that was set on the microphone. Note When the receiver does not support encryption key For details on receiver operations, refer to the exchange through USB connection, select REMOTE. operating instructions supplied with the receiver. For details on the receiver, refer to the operating Note instructions supplied with the receiver.
Using a USB Keyboard Basic Menu Operations Connecting an optional USB keyboard to the microphone Function name allows you to perform menu operations and enter your name and password for the encrypted transmission function from the keyboard. A Micro USB connector is used on the microphone. For this reason, use the supplied USB adapter cable.
The maximum RF output power can be configured on the For details about the frequency range of each band, refer unit. to “Sony Digital Wireless Microphone System Frequency Lists” on the supplied CD-ROM. For details, see “Setting the maximum RF output power (MAX RF POWER)”...
–46 –10 TYPE1: The power status is indicated based on –43 –7 characteristics of new LR6 (size AA) Sony Alkaline batteries. Select this for LR6 (size AA) alkaline batteries. 3 dB steps 3 dB steps 3 dB steps TYPE2: Select this for rechargeable nickel-metal-hydride –7...
the receiver or the system that you are using. This internal Setting the audio codec mode signal is outside the control of the attenuator. (CODEC MODE) 1kHz: A 1-kHz internal signal is generated. MODE1: This audio codec mode is compatible with the OFF: An internal signal is not generated.
Setting the Brightness of the Display (BRIGHTNESS) Ten levels of brightness can be selected for the organic light-emitting diode display. The selectable settings are the following: (Dark) 1 2 3 4 5 6 7 8 9 10 (Bright) Automatic Dimming of the Display (DIMMER MODE) The organic light-emitting diode display can be set to dim or turn off after a certain amount of time.
If you encounter a problem using this microphone, use the following checklist to find a solution. For any problems with the receiver, refer to the operating instructions supplied with the receiver. If the problem persists, consult your Sony dealer. Symptom...
For details, refer to “Sony Digital Wireless Microphone System Frequency Lists” on the supplied CD-ROM. • When only digital wireless microphones are being used,...
WARRANTY, OR FOR ANY OTHER REASON MODE set to AUTO OFF, and with WHATSOEVER. • SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY the CU-C31 Sony capsule unit KIND MADE BY USERS OF THIS UNIT OR MADE BY mounted) THIRD PARTIES.