Table of Contents
Advertisement
Data Communication
iC communication
Using iC communication
You can send and receive data to and from other devices
equipped with iC communication function.
Make the initial settings of Osaifu-Keitai in advance
(nP. 46 "Using "Osaifu-Keitai compatible services"").
iC communication is not available during NFC/Osaifu-Keitai lock.
Data cannot be sent by iC communication in Airplane mode.
In the following cases, data may not be sent by iC
communication.
During charging
During earphone/microphone connection
During USB connection
You can send and receive phonebooks, My profile, bookmarks,
still pictures, videos, etc.
When using iC communication
■
Use while placing the a mark of the receiver's device over that
of the sender's device as shown.
Do not move the devices until sending and receiving of data are
completed.
There may be some cases in which data are poorly sent and
received or the screen is off by positioning a device near
depending on the other party's device. In this case, put a
distance between the a marks apart/closer or move them up/
down or to the left/right.
Sending and receiving by iC
To enter authentication code is required for sending and
receiving all data. The authentication code is a password
exclusive to iC communication. Before starting data
communication, the sender and receiver must enter the same
user-specified four-digit code. In addition, to enter passcode
may be required for sending all data.
Sending data
■
Example: Still picture
1
In the home screen, [R]/[Contents
Manager]/[Photo]
2
Touch and hold a still picture/[Share]/[Send
by IC]
3
[Ok]
4
Place the a mark over that of the other party's
device
mark
Receiving data
■
1
Place the a mark over that of the other party's
device
2
[Accept]
3
Drag the status bar down/select the received
data
Bluetooth function
You can connect the tablet to Bluetooth devices wirelessly.
Wireless communications with all the Bluetooth devices are not
completely guaranteed.
Specifications
■
Supported version
Bluetooth standard Ver.4.0
Output
Bluetooth standard Power Class 1
*2
Supported profiles
HSP: Headset Profile
HFP: Hands Free Profile
A2DP: Advanced Audio Distribution Profile
AVRCP: Audio/Video Remote Control Profile
HID: Human Interface Device Profile
DUN: Dial-up Networking Profile
OPP: Object Push Profile
SPP: Serial Port Profile
PBAP: Phone Book Access Profile
PAN: Personal Area Networking Profile
HDP: Health Device Profile
PXP: Proximity Profile
FMP: Find Me Profile
ANP: Alert Notification Profile
PASP: Phone Alert Status Profile
*17
TIP: Time Profile
HOGP: HID Over GATT Profile
*1 The tablet and all Bluetooth function-installed devices have
ensured that they conform to the Bluetooth specification
according to the rules that the Bluetooth SIG defines, and are
all authenticated. However, operating methods might differ or
data might not be exchanged even when they are connected
wirelessly, depending on the features or specifications of
connected devices.
*2 Standardizes the communication procedures of Bluetooth
device per feature of a device.
*3 Connect a commercially available Bluetooth compatible
headset to the tablet to talk wirelessly.
*4 Connect a commercially available Bluetooth compatible
hands-free device such as a car navigation system to the tablet
to talk during hands-free operation using the car navigation
system etc.
*5 Connect a commercially available Bluetooth compatible audio
device to the tablet to play music, TV audio, etc. wirelessly.
Also, remote control operation may be available from Bluetooth
devices. However, compatible devices may be limited
depending on the data type.
*6 Connect a commercially available Bluetooth compatible input
device such as a keyboard and mouse to the tablet to operate
the tablet from the device.
*7 Connect a Bluetooth compatible PC etc. to the tablet to use the
tablet as a modem and make data communications. Note that
packet communication charges are incurred. You cannot use
mobile networks on the tablet during DUN connection.
*8 Connect a Bluetooth device to the tablet with the file transfer
service to send and receive data between them.
75
*1
(Supported services)
*3
*4
*5
*5
*6
*7
*8
*9
*10
*11
*12
*13
*14
*15
*16
*18
Data Communication
Advertisement
Table of Contents
