Table of Contents
Advertisement
M
G
C
AKING
ROUP
ALLS
Channels programmed for Conventional P25 and Trunking P25 operation
already have a Group ID assigned. For these channels, simply press and hold
the PTT switch to make the call.
the busy tone sounds. Release the PTT switch and wait for the channel to become
Otherwise, if a key has been programmed with Talkgroup (Conventional P25
only), you can select a group ID from the list to make a call to those parties.
To select a group ID:
1 Press the key programmed as Talkgroup.
2 Press the GRP
ID/name from the list that has been pre-entered into your transceiver.
• The target group ID/name appears on the display.
3 Press the PF 1 key to accept the group ID/name.
4 Press and hold the microphone PTT switch to make the call.
• Speak into the transceiver as you would during a normal transmission.
M
I
C
AKING
NDIVIDUAL
If a key has been programmed with Individual, you can make calls to
1 Press the key programmed as Individual.
2 Press the GRP
from the list that has been pre-entered into your transceiver.
• Alternatively, you can directly enter a unit ID by using a DTMF keypad.
• The target unit ID/name appears on the display.
3 Press and hold the microphone PTT switch to make the call.
• Speak into the transceiver as you would during a normal transmission.
• On Trunking channels, a ringing tone will sound and the display will alternate
between the called unit ID/name and "CALLING".
4 On Trunking channels, to end the call, press the PF 1 key or the keypad #
key.
(P25)
and
keys or rotate the CH control to select a group
(P25)
ALLS
and
keys or rotate the CH control to select a unit ID
13
Advertisement
Table of Contents
