Table of Contents
Advertisement
Preparation
Perform electrical wiring for the Hands-Free Kit featuring
Bluetooth
®
technology and install it
(\
page 24, 25). Refer to
the individual instructions for the devices to be connected as
well.
q
Items for preparation
Hands-Free Kit featuring Bluetooth
®
technology (CY-BT100U)
¡
¡
Bluetooth-ready mobile phone
Note: For the models to be supported, visit the Web Site at:
http://www.panasonic.com (Refer to the description regarding
Car Audio/AV.)
We do not guarantee that all the functions of this unit are
available on all mobile phones.
¡
Head unit
The models to be supported are shown below as of December
2005. CQ-C8803 /C8413 / C8313 / C8403 / C8303 / C7403 /
C7303 / C7203 / C7103 / C5403 / C5303 / C3433 / C3403 /
C3333 / C3303U / VD7003U, etc.
18
w
Pairing
This unit should register the Bluetooth mobile phone to be cou-
pled before using.
Step 1
Turn on the power of the Head unit. (Pairing is enabled only
when the power of the Head unit is on.)
Step 2
Press and hold the
[Hang-on] until the indicator blinks
slowly (for approximately 2 seconds).
(Press and hold
[Hang-up] for more than 2 seconds to
cancel.)
Note: Bluetooth devices other than paired should be switched
off during pairing.
Step 3
Make ready your mobile phone for pairing. As for the pairing at
the mobile phone's side, please refer to your mobile phone's
manual.
Step 4
Enter a pin number "0000" into your mobile phone and connect.
(\
Manual of your mobile phone) These actions should be done
within 60 seconds, or you may fail to pair.
Note: Depending upon the mobile phone, the connecting opera-
tions should be conducted separately.
Step 5
Wait until the indicator lights continuously (for approximately
20–30 seconds). Retry from Step 2 when the indicator does not
light.
Note:
Only the latest paired mobile phone is usable.
¡
This unit is displayed as "CY-BT100" on the screen of the
¡
mobile phone.
¡
Once pairing is established, this operation is not required until
replacing the phone with another mobile phone.
e
Microphone positioning
Position the microphone appropriately to catch sounds satisfac-
torily.
The direction of the sun visor may change the volume.
r
Communication test on
paired mobile phone
Check whether the paired mobile phone is available. (Call to the
paired mobile phone.)
t
Volume adjustment
(head unit)
Note: The volume is adjustable only when receiving calls.
q Adjust the ring volume.
The ring tone may come from the mobile phone depending on
your head unit or mobile phone. Refer to the individual instruc-
tions for the head unit or mobile phone for details.
w Adjust the volume of telephone conversation.
19
Advertisement
Table of Contents
