Table of Contents
Advertisement
3.5.2 Motion and Collision Detection
- In normal loop recording mode, press and hold POWER key
for 3 seconds, the screen will show message "Press OK to
power off or enter Motion and Collision Detection after 10
sec." Please wait for 10 seconds and the camcorder will enter
Motion and Collision Detection automatically. The camcorder
will turn off the screen temporarily, but still in standby
detection status. When the camcorder detects any motion in
front of lens or any vibration/collision, the video recording will
be triggered and the event will be recorded.
- To disable this function, press any key to wake up the screen,
and press again any key to resume to normal loop recording.
Note:
1. The video file taken in this mode will be saved in the "Emergency" folder.
2. In this mode, the event will be recorded for 10 seconds (per file). If the event lasts more
than 10 seconds, the camcorder will keep recording up to 2 minutes.
3.5.3 Timelapse
- In normal loop recording mode, press and hold POWER key
for 3 seconds, the screen will show message "Press OK to
power off or enter Timelapse after 10 sec." . Please wait for
10 seconds and the camcorder will enter Timelapse
automatically. The camcorder will turn off the screen
temporarily, but in timelapse recording status.
- To disable this function, press any key to wake up the screen,
and press again any key to resume to normal loop recording.
Note:
1. The video file taken in this mode will be saved in the "Video" folder.
2. In this mode, the camcorder is continuously recording by one second one frame. For
example, 30 minutes recording will be saved in one minute.
3. The file size is according to Record Interval setting.
32
Advertisement
Table of Contents
