Table of Contents
Advertisement
Speaker (Manual Setup)
Configures the speaker settings manually.
X
Default settings are underlined.
⬛
Power Amp Assign
Selects a speaker system.
In addition to the 5.1- or 7.1-channel speaker system, various speaker configurations are
possible using the presence speakers, Zone2 speakers, or bi-amp connection.
Settings
Select this option when you use a normal speaker system (not using Zone2
Basic
speakers or a bi-amp connection).
Select this option when you use Zone2 speakers in addition to the 7.1 system in
7.1 +1Zone
the main zone (p.25).
Select this option when you use Zone2 speakers in addition to the 5.1.2 system in
5.1.2 +1Zone
the main zone (p.26).
Select this option when you connect speakers that support bi-amp connections
5.1 Bi-Amp
(p.26).
⬛
Configuration
Configures the output characteristics of the speakers.
X
When you configure the speaker size, select "Large" if the woofer diameter of your speaker is 16 cm (6-1/4") or
larger or "Small" if it is smaller than 16 cm (6-1/4").
Front
Selects the size of the front speakers.
Settings
Select this option for large speakers.
Large
The front speakers will produce all of the front channel frequency components.
Select this option for small speakers.
Small
The subwoofer will produce front channel low-frequency components lower than
the specified crossover frequency (default: 80 Hz).
X
"Front" is automatically set to "Large" when "Subwoofer" is set to "None".
Center
Selects whether or not a center speaker is connected and its size.
Settings
Select this option for large speakers.
Large
The center speaker will produce all of the center channel frequency components.
Select this option for small speakers.
Small
The subwoofer or front speakers will produce center channel low-frequency
components lower than the specified crossover frequency (default: 80 Hz).
Select this option when no center speaker is connected.
None
The front speakers will produce center channel audio.
117
En
Advertisement
Table of Contents
