1.2 Your wireless router
RT-N12+ 300Mbps Wireless N Router
Power LED
Off: No power.
On: Device is ready.
2.4GHz LED
Off: No 2.4GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
WAN (Internet) LED
Off: No power or no physical connection.
On: Has physical connection to a wide area network (WAN).
LAN 1~4 LED
Off: No power or no physical connection.
On: Has physical connection to a local area network (LAN).
WPS / Reset button (2-in-1)
This button launches the WPS Wizard or
default settings.
LAN 1 ~ 4 ports
Connect network cables into these ports to establish LAN connection.
resets / restores the system to its factory
7