Table of Contents
Advertisement
6.4.2(For TPR-1600H/ TPR-2000H)
Fig a.
The relevant
names
No.
Name
1. Release switch
2. Clamping switch
Adjust tighten the clamping device lever as follows:
a. Press the button marked 1 in the below figure. Release the button only after you turn the
arrowhead to the point B, referring to the figure b. After the button released, the claming device
can be released.
b. Release the fastening nuts marked 3 in the figure 3.
c.
Turn the adjusting bolts about 180° clockwise, using a spanner.
d. Tighten the fastening nuts marked 3 in the figure c.
e.
Press the button marked 2 in the below figure a. Release the button only after you turn the
arrowhead to the point A, referring to the figure b. After the button released, the claming
device can be tightened.
Fig b.
6-5
Fig c.
The relevant names
No.
Name
3.
Adjusting nut
4.
Fastening nut
Advertisement
Table of Contents
