Click Start > Program > Samsung > MDC System to start the program.
Select a set to see the volume of the selected set within the slider.
Main Icons
Add a Device
Remote Control
Safety Lock
Fault Device Alert
1.
Use the main icons to switch into each screen.
2.
You can add a device by entering the IP address configured on the monitor.
3.
Allows you to enable or disable the remote control signal receiving function of the display unit.
4.
Set the Safety Lock function.
When setting the Lock function, you can only operate power and lock buttons on the remote contro
5.
When connecting to the monitor fails, it turns the function that transfers the result through an ema
6.
Selects a Lamp adjustment mode.
7.
Select a display from Display Selection.
8.
All of the monitors can be selected or deselected.
Lamp Control
Display Selection
Info Grid
Control Tools
OSD Display