Connecting other Equipment
Selecting the Colour System in AV mode
Depending on the type of video tape or connected AV equipment being used, it may be nec-
essary to select colour system. In this case, press the RECALL/COLOUR SYSTEM button
and select a suitable colour system.
Each time the RECALL/COLOUR SYSTEM button is pressed, colour system is changed
as follows;
AV
AUTO
Colour system setting for AV position is automatically stored in the memory.
Connecting to the Monitor Output Jacks
The picture signal being displayed on the TV screen is output through the Monitor Output
Jacks. Use these terminals to record TV broadcasts and for video dubbing from AV input
terminals.
INPUT
OUTPUT
OUTPUT
A
R
U
D
I
O
L
V
I
D
E
O
To record TV programme, select TV mode
by pressing the TV/AV Selector and
record the desired programme.
AV Connection to the Aerial Socket
The AV apparatus can also be connected to the aerial socket of your TV receiver.
Presetting to watch the video input
1. Playback the VCR .
2. Tune a VCR playback in programme
position that you want. (See Semi-Auto
Tuning and Manual Tuning on page 13.)
For further details concerning this connection and adjustment, refer to the operating instructions
for the AV equipment.
18
AV
PAL
NTSC4.43
Recording TV broadcasts or tape dubbing
To video and audio inputs
15
TV mode
AV
AV
NTSC
(Model CP14SA1G & CP21SA1G only)
To dub video from the AV terminal input, select AV
position by pressing the TV/AV Selector.
ANT. 75Ω
Aerial Socket
VCR for recording
AV
PLAYBACK
VCR for playback