Table of Contents
Advertisement
Installation Tools
The basic tools for installation are listed in the table below. The additional tools
required for each site need to be identified and prepared during a site survey before
starting installation.
Table 2.
Basic Installation Tools
No.
Name
1
Torque Driver
2
Screw Driver Bit
3
Screw Driver
4
Torque Wrench
5
Torque Wrench Spanner Head
6
Spanner
7
Ratchet Wrench
8
Tape Measure
9
Power Extension Cable
RFV01U-D1A Installation Manual v2.0
Copyright © 2017, All Rights Reserved.
Specification
Apply a torque range
: 2~10 lbf·in
Apply a torque range
: 20~90 lbf·in
'+', No. 2
'+', No. 3
'+', No. 2
'+', No. 3
Apply a torque range
: 10~50 lbf·in
Apply a torque range
: 100~400 lbf·in
Apply Hex. Bolt Head: 10 mm
(for 10~50 lbf·in)
Apply Hex. Bolt Head: 17 mm
(for 100~400 lbf·in)
Apply Hex. Bolt Head: 22 mm
(for 10~50 lbf·in)
Apply Hex. Bolt Head: 32 mm
(for 100~400 lbf·in)
10 mm
17 mm
22 mm
32 mm
10 × 13/17 × 19 (4 in 1)
16 ft./150 ft.
100 ft.
Confidential
Chapter 1 Before Installation
Purpose of use
For fastening finger guard (M3)
For fastening RRH ground pressure
terminal (M5, M6)
For fastening finger guard (M3, M5)
For fastening RRH ground pressure
terminal (M6)
For loosening M3, M5 screw
For loosening M6 screw
For tightening M6 Hex.Bolt and RF
connector of system (4.3-10 Type)
For tightening M10 Hex.Bolt and RF
connector of antenna (DIN Type)
For tightening M6 Hex.Bolt
For tightening M10 Hex.Bolt
For tightening RF connector of
system (4.3-10 Type)
For tightening RF connector of
antenna (DIN Type)
For loosening M6 Hex.Bolt
For loosening M10 Hex.Bolt
For loosening RF connector of
system (4.3-10 Type)
For loosening RF connector of
antenna (DIN Type)
For fastening Hex. Bolt
Tape measure for length
measurement
Basic tool
7
Advertisement
Table of Contents
