a. Remove the PCI-Express card.
b. Install the PCI-Express card.
3. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
Optical drive
Prerequisite
Before you start, read Appendix A "Important safety information" on page 63 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 41.
2. Remove the front bezel. See "Front bezel" on page 42.
3. Disconnect the signal and power cable from the optical drive.
.
Chapter 7
CRU replacement
45