Table of Contents
Advertisement
1.
NOTES:
•
•
2.
3.
NOTE:
In the EAP USER NAME, enter the user name in "User Name@FQDN" format.
Example: wlanuser@toshiba.com
GN-1050 Operator's Manual — Setting Up the Infrastructure Mode
Press the [WPA], [WPA2], or [802.1x] button and press the
[NEXT] button.
•
The AUTHENTICATION SETTINGS screen is displayed.
When the [802.1x] button is selected, only the Dynamic WEP can be selected for
the encryption setting. When the [WPA] or [WPA2] button is selected, TKIP or
AES(CCMP) can be selected.
When GN-1040 is connected, the [WPA], [WPA2], and [WPA2PSK] buttons cannot
be selected.
Press the [PEAP] button and press the [NEXT] button.
•
The WIRELESS AUTHENTICATION (EAP-TLS) screen is displayed.
Enter the following items and press the [NEXT] button.
[EAP USER NAME]
Press this to enter the EAP user name that is used for the authentication.
[EAP PASSWORD]
Press this to enter the EAP password that is used for the authentication.
1. Setting Up Wireless Network
25
Advertisement
Table of Contents
