Installation; Important Safety Instructions - Installation - Miele ProLine Tepan Yaki Operating And Installation Instructions

Table of Contents

Advertisement

Installation

IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION

Risk of damage caused by incorrect installation.
Incorrect installation can cause damage to the ProLine element.
The ProLine element must only be installed by a qualified person.
Damage from falling objects.
Take care not to damage the ProLine element when installing upper cabinets or
a ventilation hood above it.
Install the upper cabinets and ventilation hood before installing the ProLine ele-
ment.
Reaching over a hot appliance to access the cabinets can result in
burns. You can reduce the risk of burns by installing a ventilation
hood that extends at least 5" (12 cm) past the bottom of the cabi-
nets.
The countertop must be heat-resistant (up to 212°F / 100°C), so
that it does not become deformed or the veneer detached. The wall
strips must be heat-resistant as well.
The Tepan Yaki must not be installed right next to an electric bar-
becue (CS 1421). It is essential to maintain a minimum safety dis-
tance of 6" (150 mm) between the Tepan Yaki and the electric barbe-
cue.
​ ​ T he ProLine element must not be installed above refrigerators/
freezers, dishwashers, or washers/dryers.
When installing the ProLine element, make sure that the power
cord cannot come into contact with hot appliance parts.
When installing the ProLine element, make sure that the power
cord cannot come into contact with any moving kitchen parts (e.g., a
drawer), and cannot become trapped.
Observe carefully the safety clearances listed on the following
pages.
24

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs 1327

Table of Contents