Advertisement
o
A heat detector employing a Rate of Rise threshold will activate if the temperature rises 15
or
o
o.
more per minute. If an alarm temperature threshold is available, it is usually set at 135
or 194
An alarm will be triggered if any threshold is exceeded. Due to the design of the heat detection
mechanism, once an alarm has been triggered, the heat detector must be replaced.
Do not paint the heat detector.
Related Topics
Smoke and Heat Detector Battery Replacement
Here is information on how to replace the battery in your device
Finding the Right Peripheral Battery
Here you can locate the correct size and type of battery for your device
System Panel Troubleshooting
Here is information about how smoke and heat alarms may affect your system and keypad, as
well as how to reset your alarm system after an alarm has occurred.
Testing Your System
Here are instructions for placing your system in Test mode, and for removing it from Test mode
once the test is complete.
Page 8 of 8
Advertisement
