Table of Contents
Advertisement
How to use
6
Plug in the power plug.
Warm Reminder:
To use the Preset Timer Mode function, please first set the current time as follows:
Press and hold the " 時 " or " 分 " button to enter the setting screen. The corresponding
hour or minute number on the LCD screen will flash. And then press and hold or tap to
adjust the time.
After setting, the setting screen will flash for about 4 seconds to exit.
If there is no operation, it will flash for about 8 seconds to exit the setting screen.
7
Function setting - Bean/ Powder Mode
Coffee Bean Mode
Press the
button, when
is displayed on the LCD screen that means you
select the coffee bean mode.
The more coffee bean images appear on the LCD screen, the higher the strength level
is.
Low strength
Medium strength
High strength
Ground Coffee Mode
Press the
button to select the ground coffee mode.
When the LCD screen shows
, the ground coffee mode is selected. The ground
coffee mode does not allow you to select the number of cups and you do not need to
set the grinding level.
8
Set the grinding level
(only for the coffee bean mode).
Make sure that the grind adjusting knob
●
is turned to the lock position. And then
turn the grind adjusting knob to the
grind range (Otherwise, the appliance
cannot be activated).
EN12
9
10
●
Warm Reminder:
If you did not the current time after plugging in the power, please follow the steps
below to set the current time.
① In the Preset Timer Mode, press the " " button once to cancel the reservation and
② Press and hold the "時" or "分" button to enter the current time setting screen. The
●
11
●
Unlock
●
Lock
12
Fine
Rough
Standard
grinding
grinding
grinding
Grind range
Function setting - Number of coffee cups
Press the
button to select the number of cups of drip coffee required.
Function setting - Preset Timer Mode.
(Reserve a time to start brewing. This step can be omitted if no reservation is required).
Preset Timer Mode Setting Steps
①
① Press the
The LCD screen displays "
②
② Press " 時 " to set the hour time.
③ Press " 分 " to set the minute time.
③
return to the current time screen.
corresponding hour or minute number on the LCD screen will flash. Then press and hold
or tap to adjust the time. After setting, the setting screen will flash for about 4 seconds to
exit. If there is no operation, it will flash for about 8 seconds to exit the setting screen.
The time will return to the default value when the product is restarted. (Unplug the
power plug for a period of time and plug it back in.) Please reset to the current time
after each start-up. In the Preset Timer Mode, it will run according to the set current
time.
Press the
button to start
Press the
button to enter the drip coffee program, the LCD screen will show
and flash. 4 beeps will be heard when the drip is complete.
When the drip is complete, it will automatically enter the Keep-Warm Mode with
flashing on the LCD screen (Keep-Warm Mode will run for 40 minutes by default, and
8 beeps will be heard when the Keep-Warm Mode is finished). Press
if you don't need to keep it warm.
After use, please unplug the plug.
(only available in coffee bean mode).
button to enter the Preset Timer Mode
".
(to enter the drip coffee program).
to cancel it
EN13
Hide quick links:
Advertisement
Table of Contents
