Page 1
After all electrical connections have been made; apply power to the TE3 Series Soft Starter. On initial power up, TE3 Series Soft Starter will show a ‘Setup Wizard’ menu – Auto and Advanced. To jump immediately to the pre-defined parameter sets, press the Auto button and follow the on-screen prompts to select your application and set the motor Full Load Amps.
Page 2
Keypad Main Overview Status LED The logo LED located on the front panel of the TE3 Series Soft Starter will blink once every 10 seconds to provide visual confirmation that all microprocessors in the soft starter are operating properly. Setup by Individual Parameter Settings Allows the user to change parameter settings one at a time.