4. PTP Setting Using AP Manager
① PTP stands for Point to Point, and it is used to connect two divided networks
into one using one slot of AP as Wireless Bridge. In this case, the other slot is
used for capabilities of Access Point.
< AP Slot Area>
② After executing AP Manager, select [Radio] tab on "Tab Bar". Select slot to set
PTP on "List Box" using mouse(by click the shape of Wireless LAN Card), and
confirm setting status on [Radio] Dialogue Box.
Confirm AP Operation Mode
Internet Network
(Hub)
< Point to Point Area>
Confirm Slot
10
< AP Slot Area>
MAC ID of Wireless LAN
Card on Selected Slot
"Default Values"
Recommended