D-Link M32 Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Router
  5. M32
  6. Manual

D-Link M32 Manual

Hide thumbs Also See for M32:
Table of Contents

Advertisement

Quick Links

AX3200
AX3200 WI-FI 6
AI MESH ROUTER
M32

Advertisement

Table of Contents
loading

Related Manuals for D-Link M32

Summary of Contents for D-Link M32

  • Page 1 AX3200 AX3200 WI-FI 6 AI MESH ROUTER...
  • Page 2 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.

  • Page 3: Table Of Contents

    M32 LED Indicator ..............4 QoS Engine................45 M32 Rear .................. 5 Firewall ...................47 Hardware Setup ................6 IPv4/IPv6 Rules ...............49 Using The D-Link Ai App ........... 6 Port Forwarding ..............50 Web Based Installation .............. 7 Port Forwarding .............50 Virtual Server ..............51 Configuration ..............8 Static Routes .................52...
  • Page 4 Table of Contents Statistics .................66 Adding Additional Mesh Points........67 Using the D-Link Ai app ............67 Registering a D-Link Cloud Service Account ....69 Voice Assistants ................72 Amazon Alexa Setup ............73 Amazon Alexa Voice Commands ........77 The Google Assistant Setup ..........78 The Google Assistant Voice Commands .....81 Connect to a Wireless Client ...........82...

  • Page 5: Package Contents

    Section 1 - Product Overview Package Contents M32 AX3200 Wi-Fi 6 AI Mesh Router Power adapter Ethernet Cable Quick Installation Guide If any of the above items are missing or damaged, please contact your local reseller. D-Link M32 User Manual...

  • Page 6: System Requirements

    • Firefox 28 or higher • Safari 6 or higher • Chrome 28 or higher D-Link Ai app • iOS® or Android™ device (Please refer to the app's store page to Requirements check whether your device is compatible.) D-Link M32 User Manual...

  • Page 7: Introduction

    Introduction Introducing the M32. The seamless Wi-Fi solution that’s the perfect fit for your modern home. It features high-performance Router that blanket every square inch of your home with high-speed AX3200 Wi-Fi as well as four on-board Gigabit Ethernet ports (per unit) for wired connectivity.

  • Page 8: Hardware Overview

    Once set up, a solid white LED indicates a strong connection. Status LED Once set up, a blinking white LED indicates a weak connection, or the M32 is connecting to a Blinking white wireless client using Wi-Fi Protected Setup (WPS).

  • Page 9: M32 Rear

    Insert a paperclip in the hole wait for LED turns solid red, then release to reset the router to default Reset Button settings. Power Connector Connect the included power adapter here to power on the device. Power Button Press the power button to power the device on or off. D-Link M32 User Manual...

  • Page 10: Hardware Setup

    The D-Link Ai app allows you to install and configure your device from your compatible Android or iOS device. Note: The screenshots may be different depending on your mobile device’s OS version. The following steps show the iOS interface of the D-Link Ai app.

  • Page 11: Web Based Installation

    (WXYZ represents the last 4 characters of the MAC address) Your mesh device is now set up and ready to use. You can now configure your Wi-Fi settings using the free D-Link Ai app or the web-based user interface. Refer to the Configuration section on page page 8 for more information on configuring your network using the web-based user interface.

  • Page 12: Configuration

    • If this is the first logging in, leave the password blank. • If you have previously completed the Setup Wizard, specify the password you created during initial setup 4. Click Log In. Note: The system will automatically log out after a period of inactivity. D-Link M32 User Manual...

  • Page 13: Home

    The menu bar at the top of the page will allow you to quickly navigate to other pages. Refer to the following pages for a description of each section. D-Link M32 User Manual...

  • Page 14: Internet

    Click Pause Internet Access for clients to temporarily disconnect the Internet connection, alternatively click Resume Internet Access to resume the Internet access if previously paused. To reconfigure the Internet settings, click Go to settings at the bottom-right. D-Link M32 User Manual...

  • Page 15: M32

    Section 3 - Configuration Click on the M32 icon to view details about the wireless and local network settings. This includes IPv4 and IPv6 local networks, and Wi-Fi information. This overview is only informational. To configure these sections, refer to the corresponding configuration sections in this manual.

  • Page 16: Connected Clients

    The schedule may be set to Always Off, or you can create your own schedules in the Schedule section. Refer to Schedule on page 58 for more information. Click Save when you are done. D-Link M32 User Manual...

  • Page 17: Extenders

    Mesh Wi-Fi network, click the settings icon in the bottom-right of the Extenders's box and click Remove. Name: Enter a name for the Mesh Point. MAC Address: Displays the MAC address of the Mesh Point. Click Save when you are done. D-Link M32 User Manual...

  • Page 18: Mesh Network

    To reboot a Extenders, click the settings icon in the bottom-right of the Extenders's box and click Reboot. To remove a Extenders from your Mesh Wi-Fi network, click the settings icon in the bottom-right of the Extenders's box and click Remove. D-Link M32 User Manual...

  • Page 19: Settings

    This is the same wizard that appears when you set up the device using the web-user interface for the first time. This Wizard will also launch when clicking the Click to Repair button when no Internet connection is detected. D-Link M32 User Manual...

  • Page 20: Internet

    For PPTP refer to PPTP on page 21. For L2TP refer to L2TP on page 23. For DS-Lite refer to DS-Lite on page 25. IPv6 link. Refer to page To configure an IPv6 connection, click the D-Link M32 User Manual...
  • Page 21 The default MAC address is set to the physical interface MAC address Clone: of port 1 on Mesh Point A. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link M32 User Manual...
  • Page 22 The default MAC address is set to the physical interface MAC address Clone: of port 1 on Mesh Point A. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link M32 User Manual...
  • Page 23 Enter the secondary DNS server IP address assigned by your ISP. This Server: address is usually obtained automatically from your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. D-Link M32 User Manual...
  • Page 24 The default MAC address is set to the physical interface MAC address Clone: of port 1 on Mesh Point A. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link M32 User Manual...
  • Page 25 Enter the secondary DNS server IP address assigned by your ISP. This Server: address is usually obtained automatically from your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. D-Link M32 User Manual...
  • Page 26 Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link M32 User Manual...
  • Page 27 Enter the secondary DNS server IP address assigned by your ISP. This Server: address is usually obtained automatically from your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. D-Link M32 User Manual...
  • Page 28 Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link M32 User Manual...
  • Page 29 Enter the B4 IPv4 address value used here. WAN IPv6 Once connected, the WAN IPv6 address will be displayed here. Address: IPv6 WAN Default Once connected, the IPv6 WAN default gateway address will be Gateway: displayed here. Click Save when you are done. D-Link M32 User Manual...

  • Page 30: Ipv6

    For Static IPv6 refer to page 27. For Auto Configuration (SLAAC/DHCPv6) refer to page 29. For PPPoE refer to page 31. For 6rd refer to page 34. For Local Connectivity Only refer to page 36. D-Link M32 User Manual...
  • Page 31 Enter the secondary DNS server address. Server: LAN IPv6 Address Settings LAN IPv6 Address: Enter the LAN (local) IPv6 address for Mesh Point A. LAN IPv6 Link- Displays Mesh Point A's LAN link-local address. Local Address: D-Link M32 User Manual...
  • Page 32 Enter the starting IPv6 address for the DHCP server’s IPv6 assignment. Range (Start): IPv6 Address Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. Range (End): IPv6 Address Enter the IPv6 address lifetime (in minutes). Lifetime: Click Save when you are done. D-Link M32 User Manual...
  • Page 33 Displays Mesh Point A's LAN link-local address. Local Address: If Enable DHCP-PD is disabled, these additional parameters are available for configuration: LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link- Displays Mesh Point A's LAN link-local address. Local Address: D-Link M32 User Manual...
  • Page 34 IPv6 Address Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. Range (End): IPv6 Address If Enable DHCP-PD is disabled, enter the IPv6 address lifetime (in Lifetime: minutes). Click Save when you are done. D-Link M32 User Manual...
  • Page 35 ISP. Service Name: Enter the ISP service name (optional). Reconnect Mode: Select either Always On or Manual. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. D-Link M32 User Manual...
  • Page 36 Displays Mesh Point A's LAN link-local address. Local Address: If Enable DHCP-PD is disabled, these additional parameters are available for configuration: LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link- Displays Mesh Point A's LAN link-local address. Local Address: D-Link M32 User Manual...
  • Page 37 IPv6 Address Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. Range (End): IPv6 Address If Enable DHCP-PD is disabled, enter the IPv6 address lifetime (in Lifetime: minutes). Click Save when you are done. D-Link M32 User Manual...
  • Page 38 Enter the 6rd border relay IPv4 address settings supplied by your ISP. IPv4 Address: LAN IPv6 Address Settings LAN IPv6 Address: Displays Mesh Point A's LAN IPv6 Address link-local address. LAN IPv6 Link- Displays Mesh Point A's LAN link-local address. Local Address: D-Link M32 User Manual...
  • Page 39 Enter the starting IPv6 address for the DHCP server’s IPv6 assignment. Range (Start): IPv6 Address Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. Range (End): IPv6 Address Enter the IPv6 address lifetime (in minutes). Lifetime: Click Save when you are done. D-Link M32 User Manual...
  • Page 40 If you selected Enable ULA and disabled Default ULA Prefix: ULA Prefix: Enter your own ULA prefix. Current IPv6 ULA Settings Current ULA Displays the current ULA prefix. Prefix: LAN IPv6 ULA: Displays the LAN's IPv6 ULA. Click Save when you are done. D-Link M32 User Manual...

  • Page 41: Wireless

    WPS-PBC Status: Enable or disable WPS Push Button Configuration (PBC) functionality. Enabling this feature allows wireless clients to connect to the Wi-Fi through an encrypted connection by using the WPS button. Click Save when you are done. D-Link M32 User Manual...

  • Page 42: Guest Zone

    Enable or disable the Guest Wi-Fi network. Wi-Fi Name (SSID): Enter a name for your guest wireless network. Password: Create a password for your guest Wi-Fi network. Wireless clients will need to enter this password to successfully connect to the network. D-Link M32 User Manual...

  • Page 43: Network

    Local Domain Enter the domain name (optional). Name: Enable DNS Relay: Disable to transfer the DNS server information from your ISP to your computers. If enabled, your computers will use Mesh Point A for a DNS server. D-Link M32 User Manual...
  • Page 44 Enable to allow IPv4 multicast traffic to pass through Mesh Point A Streams: from the Internet. IPv6 Multicast Enable to allow IPv6 multicast traffic to pass through Mesh Point A Streams: from the Internet. Click Save when you are done. D-Link M32 User Manual...

  • Page 45: D-Link Cloud

    D-Link Cloud In the Settings menu on the bar at the top of the page, click D-Link Cloud to see your D-Link Cloud Service details. This page lists whether you are registered with D-Link Cloud Service and email address associated with the account. Use the D- Link Ai app to find out more about D-Link Cloud's features.

  • Page 46: Operation Mode

    Click Save at any time to save the changes you have made on this page. Operation Mode Settings Router Mode Select Router Mode to run this device as a router. Extender Mode Select Extender Mode to run this device as an extender D-Link M32 User Manual...

  • Page 47: Features

    Set a time period for the device to be allowed Internet access. when you want to be online) Bedtime Schedule(Set Set a time period for the device to be denied Internet access. a bedtime for time away from the internet) D-Link M32 User Manual...
  • Page 48 Enter a Website name that you wish to deny access to. URL Keyword Enter a URL Keyword name that you wish to deny access to. Device Click the Add Device button to select the devices that you wish to add to the schedule D-Link M32 User Manual...

  • Page 49: Qos Engine

    Enter the maximum upload speed (in Mbps) for all connected clients (Mbps): combined. If QoS is enabled, once this threshold is reached, traffic of clients with higher priority will be processed first, while traffic of lower priority clients will wait until enough bandwidth becomes available. D-Link M32 User Manual...
  • Page 50 If you want to remove a priority assignment from a device and return it to the Connected Clients list, click the close button (x) in the top right of the device card. Click Save when you are done. D-Link M32 User Manual...

  • Page 51: Firewall

    Enable Anti-Spoof Enable this feature to protect your network from certain kinds of Checking: “spoofing” attacks. IPv6 Simple Enable or disable IPv6 simple security. Security: IPv6 Ingress Enable or disable IPv6 ingress filtering. Filtering: D-Link M32 User Manual...
  • Page 52 NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. Click Save when you are done. D-Link M32 User Manual...

  • Page 53: Ipv4/Ipv6 Rules

    The schedule may be set to Always Enable, or you can create your own schedules in the Schedule section. Refer to Refer to Schedule on page 58 for more information. Click Apply when you are done. D-Link M32 User Manual...

  • Page 54: Port Forwarding

    The schedule may be set to Always Enable, or you can create your own schedules in the Schedule section. Refer to Schedule on page 58 for more information. Click Apply when you are done. D-Link M32 User Manual...

  • Page 55: Virtual Server

    The schedule may be set to Always Enable, or you can create your own schedules in the Schedule section. Refer to Schedule on page 58 for more information. Click Apply when you are done. D-Link M32 User Manual...

  • Page 56: Static Routes

    A value of 1 is the lowest cost and 16 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done. D-Link M32 User Manual...

  • Page 57: Ipv6

    A value of 1 is the lowest cost and 16 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done. D-Link M32 User Manual...

  • Page 58: Dynamic Dns

    Time Out: Enter a timeout time (in hours). Click Save when you are done. At the bottom of the page are the IPv6 host settings. To configure an IPv6 dynamic DNS host, refer to following page. D-Link M32 User Manual...
  • Page 59 Enter the host name that you registered with your dynamic DNS service provider. IPv6 Address: Enter the IPv6 address of the dynamic DNS server. Alternatively, select the server device in the drop-down menu. Click Apply when you are done. D-Link M32 User Manual...

  • Page 60: Quick Vpn

    Device and MAC OS X or Mac OS X. Advanced Settings... Authentication Choose the authentication protocol type: MSCHAPv2, PAP, Protocol or CHAP. MSCHAPv2 is the default. MPPE Select the encryption cipher strength: None, RC4-40, or RC4- 128.RC4-128 is the default. D-Link M32 User Manual...

  • Page 61: Management

    Displays the current date and time of the extender. Automatic Time Configuration NTP Server: Select an NTP server from the drop-down menu. You can also set the NTP server manually by selecting Manual. Click Save when you are done. D-Link M32 User Manual...

  • Page 62: Schedule

    To remove a time period from the schedule, click on the cross icon at the end of the highlighted section. Click Apply when you are done. D-Link M32 User Manual...

  • Page 63: System Log

    If E-mail notification is Enabled: From E-mail Enter the email address your SysLog messages will be sent from. Address: To E-mail Address: Enter the email address your SysLog messages will be sent to. D-Link M32 User Manual...
  • Page 64 The schedule may be set to Always Enable, or you can create your own schedules in the Schedule section. Refer to Schedule on page 58 for more information. Click Save when you are done. D-Link M32 User Manual...

  • Page 65: System Admin

    Point A and 8080 is the port used for the web management interface. Note: If you enabled Use HTTPS and wish to access Mesh Point A remotely and securely, you must enter https:// at the beginning of the address. D-Link M32 User Manual...
  • Page 66 -Establishing a WPS connection -Weak uplink signal -No uplink signal Once any of the above situations has ended, the LED will briefly light up solid white and then turn off again. Click Save when you are done. D-Link M32 User Manual...

  • Page 67: System

    Use the drop-down menu to select a schedule for the device to automatically reboot. The schedule may be set to Never, Daily, or Weekly. Depending on your selection, set a time and date for the auto reboot schedule. Click Save when you are done. D-Link M32 User Manual...

  • Page 68: User

    Create User button. User Name Enter a username for the new user account. Password Enter a password for the new user account. Status Enable or disable Virtual Private Network (VPN) functionality for this user. D-Link M32 User Manual...

  • Page 69: Upgrade

    Next, select a device from the drop-down menu to upgrade firmware for. Then, click the Select File button and browse to the firmware file you want to install. With the file selected, click Upload to begin the upgrade process. D-Link M32 User Manual...

  • Page 70: Statistics

    You can view the Internet, LAN, Wi-Fi 2.4GHz, and Wi-Fi 5GHz by clicking on the respective tabs at the top of the graph. The graph will update in real time. To clear the information on the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link M32 User Manual...

  • Page 71: Adding Additional Mesh Points

    You can easily add additional units using your mobile device. Refer to the steps below to learn how to add more Mesh Points to your network using the D-Link Ai app. Step 1 Open the D-Link Ai app, then tap the menu icon in the top-left to open the app menu. D-Link M32 User Manual...
  • Page 72 Installation Guide of the new Mesh Point. You will now be guided through a step-by-step process for setting up the new Mesh Point. Simply follow the on-screen steps to complete the installation process. Repeat this process to add additional Mesh Points. D-Link M32 User Manual...

  • Page 73: Registering A D-Link Cloud Service Account

    Registering a D-Link Cloud Service Account In order to use third party services to control and manage your device, you will first need to register your device with D-Link Cloud Service. Follow the steps below if you do not have a D-Link Cloud Service account.
  • Page 74 Section 5 - Third Party Services Step 3 Tap the Cloud Service icon. Step 4 Tap the Register button. D-Link M32 User Manual...
  • Page 75 In this menu, you can sign up for a D-Link account using Facebook, Google or an Email address. If you already have a D-Link account, you can tap the Log In link at the bottom of the screen to be redirected to the login page.

  • Page 76: Voice Assistants

    D-Link Cloud Service. This section will go through how to set up and link your Amazon Alexa or the Google Assistant to D-Link Wi-Fi.

  • Page 77: Amazon Alexa Setup

    Section 5 - Third Party Services Amazon Alexa Setup You will need the Amazon Alexa app, an Amazon account, an Amazon Alexa device and a D-Link Cloud Service account to use this feature. Note: The screenshots may be different depending on your mobile device’s OS version. The following steps show the iOS interface.
  • Page 78 Section 5 - Third Party Services Step 3 Tap on Skills & Games. Step 4 Search for "D-Link Wi-Fi". Tap on the search result. D-Link M32 User Manual...
  • Page 79 Section 5 - Third Party Services Step 5 Tap Enable to link the skill. Step 6 Sign in using your D-Link account details. D-Link M32 User Manual...
  • Page 80 Section 5 - Third Party Services Step 7 Congratulations! D-Link Wi-Fi has been successfully linked as a skill for your Amazon device. Close the window by tapping Done on the top left corner of the screen. Refer to Amazon Alexa Voice Commands on page 77 for tasks that you can ask your Amazon Alexa to perform.

  • Page 81: Amazon Alexa Voice Commands

    Section 5 - Third Party Services Amazon Alexa Voice Commands With D-Link Wi-Fi enabled as a skill for Alexa, you can ask Alexa to do any of these tasks: Task Command Enable the guest zone. “Alexa, ask D-Link Wi-Fi to enable my guest zone. ”...

  • Page 82: The Google Assistant Setup

    The Google Assistant Setup You will need the Google Assistant app, a Google account and a D-Link Cloud Service account to use this feature. Note: The screenshots may be different depending on your mobile device’s OS version. The following steps show the iOS interface.
  • Page 83 Section 5 - Third Party Services Step 3 Tap Yes. Step 4 Sign in using your D-Link account details. D-Link M32 User Manual...
  • Page 84 Step 5 Tap Allow to continue setup.. Step 6 Congratulations! D-Link Wi-Fi has been successfully linked to your Google Assistant. Refer to The Google Assistant Voice Commands on page 81 for tasks that you can ask your Google Assistant to perform.

  • Page 85: The Google Assistant Voice Commands

    Section 5 - Third Party Services The Google Assistant Voice Commands With D-Link Wi-Fi enabled as a skill for the Google Assistant, you can ask your Google Assistant to do any of these tasks: Task Command Enable the guest zone.

  • Page 86: Connect To A Wireless Client

    Step 2 - Within 120 seconds, press the WPS button on your wireless device (or launch the software utility and start the WPS process). Step 3 - Allow up to 1 minute for your connection to be configured. Once the LED stops blinking, you will be connected and your wireless connection will be encrypted with WPA2. D-Link M32 User Manual...

  • Page 87: Wireless Basics

    D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers.

  • Page 88: What Is Wireless

    Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
  • Page 89 Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home uses/benefits • Gives everyone at home broadband access •...

  • Page 90: Tips

    The wireless connection in public places is usually called “hotspots”. Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coffee shops, libraries, restaurants, and convention centers.

  • Page 91: Technical Specifications

    IEEE 802.11g IEEE 802.11b IEEE 802.11k IEEE 802.11v IEEE 802.11ac IEEE 802.11a IEEE 802.11h WAN Interface Static IP Dynamic IP PPPoE PPTP L2TP DS-Lite Support 802.1p & 802.1q VLAN tagging and Priority bit Concurrent session: 30000 D-Link M32 User Manual...
  • Page 92 5% to 95% non-condensing Certifications CE , FCC , IC, RCM Software D-Link Ai app Support Android Alexa Voice Control Voice Control Google Assistance Voice Control The marking information is located at the bottom of the apparatus. D-Link M32 User Manual...

  • Page 93: Regulatory Information

    Note The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only. D-Link M32 User Manual...
  • Page 94 (v) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650- 5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. D-Link M32 User Manual...
  • Page 95 Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 24 cm de distance entre la source de rayonnement et votre corps. D-Link M32 User Manual...
  • Page 96 Appendix C - Safety Statements 以下警語適用台灣地區 依據 低功率電波輻射性電機管理辦法 第十二條: 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變 更原設計之特性及功能。 第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至 無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工 業、科學及醫療用電波輻射性電機設備之干擾。 1.使用此產品時應避免影響附近雷達系統之操作。 「電磁波曝露量MPE標準值1mW/cm ，本產品使用時建議應距離人體 24 cm」 D-Link M32 User Manual...
  • Page 97 Potencia máxima de Salida Frequenza/e Potenza max. Output Frequentie(s) Max. Output Power 5.15 – 5.25 GHz 200 mW 5.25 – 5.35 GHz 200 mW 5.47 – 5.725 GHz 2.4 G 2.4 – 2.4835 GHz 100 mW D-Link M32 User Manual...
  • Page 98 υλικολογισμικό του προϊόντος είναι διαθέσιμα για λήψη από τη σελίδα του προϊόντος στην τοποθεσία www.dlink. com. Par les présentes, D-Link Corporation déclare que ce produit, ces accessoires et ce logiciel sont conformes aux Français [French] directives 2014/53/UE.Le texte complet de la déclaration de conformité de l'UE et le icroprogramme du produit sont disponibles au téléchargement sur la page des produits à...
  • Page 99 2014/53/EU. Pełen tekst deklaracji zgodności UE oraz oprogramowanie sprzętowe do produktu można pobrać na stronie produktu w witrynie www.dlink.com. Desta forma, a D-Link Corporation declara que este produto, os acessórios e o software estão em conformidade Português [Portuguese] com a diretiva 2014/53/UE. O texto completo da declaração de conformidade da UE e do firmware...
  • Page 100 Appendix C - Safety Statements Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun Íslenska [Icelandic] 2014/53/EB. Sækja má ESB-samræmisyfirlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www.
  • Page 101 Access Points unterstützen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb auf 5 GHz innerhalb der EU. • Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link M32 User Manual...
  • Page 102 5 Ghz dentro de la UE. • Por favor compruebe el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5 GHz. D-Link M32 User Manual...
  • Page 103 Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik in 5 GHz binnen de EU. • Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link M32 User Manual...
  • Page 104 • Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen. • Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch. D-Link M32 User Manual...
  • Page 105 • Mantenga el producto alejado de los radiadores y de otras fuentes de calor. • Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa. D-Link M32 User Manual...
  • Page 106 • Houd het product uit de buurt van radiators en andere warmtebronnen. • U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link M32 User Manual...
  • Page 107 D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.
  • Page 108 D-Link et l’environnement Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.
  • Page 109 D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies.
  • Page 110 D-Link a životní prostředí Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
  • Page 111 D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i produktene og forpakningen. D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp.
  • Page 112 D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne.
  • Page 113 D-Link och miljön På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och förpackningar.

Table of Contents