Reset Interlocking Output (H9/C3); Disable Interlocking Output (H9/C4); Re-Enable Interlocking Output (H9/C5); Interlocking Control Expressions - Panasonic EBL512 G3 Planning Instructions
Fire alarm system
Hide thumbs
Also See for EBL512 G3:
- Operating instructions manual (134 pages) ,
- User manual (31 pages) ,
- Information (2 pages)
Table of Contents
Advertisement
Panasonic Eco Solutions Nordic AB
MEW01472
Rev: -
14.3.3
14.3.4
14.3.5
14.4
Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
The "Interlocking Combination" (Area / Point) is to be entered to
activate the output. The corresponding interlocking input will be
"monitored" in the same way as if the output was activated by its
control expression.
Reset has to be performed via menu H9/C3.
Reset interlocking output (H9/C3)
Activated interlocking outputs are listed here. Use "↑" "↓" to scroll
between the "Interlocking Combinations" (Area / Point).
Interlocking output activated via its control expression and latched
output selected: The output has to be reset via this menu.
Interlocking output activated via its control expression and latched
output not selected: The output can be reset via this menu.
Interlocking output activated via menu H9/C2: The output has to be
reset via this menu.
Disable interlocking output (H9/C4)
Interlocking outputs (i.e. Output Type = Interlocking) can be
individually disabled via menu H9/C4. NOTE! Not via menu H2/B3.
A disabled output will stay in (or return to) the normal condition for
the output respectively. The "Interlocking Combination" (i.e. Area /
Point) is to be entered to disable the output.
If Area / Point 000/00 is entered all interlocking outputs in the system
will be disabled / re-enabled.
Re-enable interlocking output (H9/C5)
Interlocking outputs (i.e. Output Type = Interlocking) can be re-
enabled via menu H9/C5. NOTE! Not via menu H2/B6.
Disabled interlocking outputs are listed in menu H9/C5. Use "↑" "↓"
to scroll between the "Interlocking Combinations" (i.e. Area / Point)
or type it via the key-pad. Area / Point 000/00 can also be used.
Interlocking control expressions
A programmable output control expression can contain "interlocking"
trigger conditions ("Functions") numbers 15-18 (see chapter "Control
expression", page 71), i.e. one or more outputs can be activated when
one or more interlocking inputs are activated.
82
Advertisement
Table of Contents
