NEC SL2100 Hardware Manual page 75
Hide thumbs
Also See for SL2100:
- Features and specifications manual (978 pages) ,
- Programming manual (678 pages) ,
- Networking manual (196 pages)
Advertisement
ISSUE 4.0
2.
Cut and remove Plastic Knockout from the Sub-Cover to connect Battery cable.
For your safety, smooth the cut edges after removing the plastic
knockout.
Plastic
Knockout
Cut
Battery cable
3.
Connect Battery cable from the Battery box to Battery connector on the Chassis.
2.8 IP4WW-Battery Box Fuse Replacement
• In the event of a blown fuse correct the fault causing the fuse to blow before replacing
the fuse; otherwise you may cause fire or electrical hazards.
• Be sure to use only the specified fuse (250V T8AL).
• Be sure to install the fuse into the correct location.
• Be careful not to burn yourself on the heated fuse. The blown fuse may be heated soon
after blowing.
• If Expansion Chassis are installed, turn the power on/off in the order of Expansion 2
Chassis, Expansion 1 Chassis and then Main Chassis.
1.
Power off the Chassis and disconnect AC cord.
INSTALLING THE EXTERNAL BACKUP BATTERY
Figure 2-49 Connecting Battery Cable
SL2100
73
Advertisement
