Table of Contents
Advertisement
NAT Setting
>Net Setting
>IP Address
PPPoE
Static IP Setup:
>IP Address
PPPoE
Case A
IP (Read Only):
192.168.0.1
3. Press the [ >> ] key repeatedly, until " >Net
Setting " is displayed on the LCD, then press
the [Select] key.
4. There are 4 options here, they are:
IP Address (Static IP),
PPPoE, DHCP, and
MAC (MAC address lookup). Press the [ << ]
key or the [ >> ] until the proper IP address
setup method is displayed, then press the
[Select] key.
1. Press the [Select] key when
" >IP Address " is displayed on the LCD,
then press the [Select] key (If not, press [ << ]
or [ >> ] until it is displayed).
2. Please check the message displayed on the
LCD now:
In Case A, it means that DHCP is enabled;
Please use the following procedure to disable
DHCP; first:
Press the [Menu] key once to return to the
previous menu then press the [ >> ] key until
" >DHCP Set " is displayed, then press the
14
Advertisement
Table of Contents
