Table of Contents
Advertisement
5.4
How to change the codes in a group
Code change in Drive group
Drive group
Code change in Function group 1
When moving from the "F 0" to the "F 15" directly
Function
group 1
-. In the 1
1
Up ( ) key once.
-. The 2
2
displayed.
-. Press the Up ( ) key once.
-. The 3
displayed.
3
-. Keep pressing the Up ( ) key until the last
code appears.
-. The last code in Drive group "drC" is
4
displayed.
-. Press the Up ( ) key again.
5
-. Return to the first code of Drive group.
♣
Use Down ( ) key for the opposite order.
1
-. Press the Prog/Ent ( ) key in "F 0".
-. 1 (the code number of F1) is displayed. Use the
2
Up ( ) key to set to 5.
-. "05" is displayed by pressing the Left ( ) key
once to move the cursor to the left. The numeral
3
having a cursor is displayed brighter. In this case, 0
is active.
-. Use the Up ( ) key to set to 1.
-. 15 is set.
4
-. Press the Prog/Ent ( ) key once.
5
-. Moving to F 15 has been complete.
♣
Function group 2 and I/O group are settable with the same setting.
5-5
5. Programming keypad
st
code in Drive group "0.0", press the
nd
code in Drive group "ACC" is
rd
code "dEC" in Drive group is
SV-iC5
- Quick Links:
- Terminal Wiring
- Wiring
Hide quick links:
Advertisement
Table of Contents
