Advertisement
Quick Links
—
Step5. View Connected Devices
From a computer log onto AWIN GW120 webpages. To do
so, the computer has to be on the same network as the
AWIN GW120. Open web browser (e.g. IE) and type:
'https://172.16.16.10' and hit enter to continue. Subnet
mask is '255.255.252.0'.
Use the following credentials to login.
User: 'admin'
Password: 'admin'.
Browse to Configuration>WirelessHART> Devices. After few
minutes of Step4, the ABB wireless devices should appear
here if operating at default settings. To connect non-ABB
devices, refer to their user manual.
Step6. Apply Minimum Settings
Assuming that the field wireless devices are already
parameterized from the factory. User shall consider making
configuration changes on the following pages:
• Configuration>Network interface> Change IP Configuration.
• Configuration>WirelessHART>Network Configuration.
• Configuration>Usernames/Passwords.
• Configuration>General.
Afterwards, Select:
• Maintenance>Reboot.
Wait till the system reboots and wireless devices connect.
Step7. All Done! Connect From Host System.
Connect from host system that supports ModbusTCP to
AWIN GW120 gateway. If you use auto Modbus mapping
functionality then no configuration is required. Moreover,
refer to the user manual to find information about device
parameters and data types available over Modbus
connection.
Modbus mapping information available at:
• Configuration>Modbus>Modbus Configuration.
• Configuration>Modbus>Modbus Mapping.
This quick setup guide should be used for reference only. It is not a replacement of
user manual or data sheets.
U.S. patents apply to this product.
For details visit: https://sipcollc.com/patent-list/
In conformity with European local and national
regulations (EU Directive 2012/19/EU, electrical
equipment marked with this symbol may not be
disposed in European public disposal system.
i
IMPORTANT (NOTICE)
For return for recycling, please contact the equipment
manufacturer or supplier for instructions on how to
return end-of-life equipment for proper disposal
—
Contact
ABB AS
Email: contact.center@no.abb.com
abb.com/awin
Contact Center offers you a single point of contact for all your inquiries to ABB.
Your inquiries will be routed to correct person or registered for further follow-up.
Customers with a service agreement may contact our dedicated Service Desk on a
separate number.
Copyright© 2021 ABB
All rights reserved
WirelessHART® is a registered trademark of FieldComm Group
—
QUICK SETUP GUIDE
AWIN GW120
WirelessHART® Gateway
Making Field Wireless Easy
Advertisement
Related Manuals for ABB WirelessHART AWIN GW120
Summary of Contents for ABB WirelessHART AWIN GW120
- Page 1 AWIN GW120 gateway. If you use auto Modbus mapping functionality then no configuration is required. Moreover, Contact Center offers you a single point of contact for all your inquiries to ABB. refer to the user manual to find information about device Your inquiries will be routed to correct person or registered for further follow-up.
- Page 2 100 WirelessHART devices. It creates and manages dard DIN rail. Optionally, use end clamps to prevent the the accessories that are available from ABB. The use of any WirelessHART network and converts HART data to module from moving on the rail.