5 Configuration and Settings
5.2
Using 16 characters per line in the LOGO! Display
LOGO!Soft Comfort V7 offers the possibility of using several character sets for the
message display. By default, 12 characters per line are used in the display, with
the following parameter setting:
"Message text setting" "Use new feature" (unchecked) and as character set
ISO8859 1.
With the setting "Use new feature" and "character set 1" or "2": "GBK" can be
displayed with up to 16 characters per line.
Table 5-2
No.
1.
If 16 characters per line are to be displayed in
the LOGO! display, the option box "Use new
feature" in the menu item "File" → "Message
Text Setting" must be checked and the
Character Set "GBK" must be set.
5.3
Configuring the SIRIUS monitoring relay
Table 5-3
No.
1.
Set the SIRIUS monitoring relay to the desired
sensitivity:
With the potentiometer, the specific resistance
of the fluid to be monitored is entered.
Set the sensitivity to about 20kOhm.
2.
The monitoring mode of the SIRIUS monitoring
relay must be set to dry run. To do so, set the
position switch to "OVER".
Set23_RegSim
Entry ID: 23753479,
V2.3.S,
Function
Action
02/2014
Comments
Comments
21