Epson WorkForce Pro WF-C4810 Series Start Here
Hide thumbs
Also See for WorkForce Pro WF-C4810 Series:
- User manual (385 pages) ,
- User manual (383 pages) ,
- Start here (4 pages)
Advertisement
Quick Links
WF-C4810 Series
Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online User's
Guide.
This printer is designed for use with Epson
Note:
third-party cartridges or ink. For important ink information, visit
http://epson.com/epsonink (U.S.) or http://epson.ca/epsonink
(Canada) or see your printer box.
Important Safety Instructions:
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson product near water.
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
To reduce the risk of fire, use only a No. 26 AWG or larger
Caution:
telecommunication line cord.
1
Unpack
Do not open the ink cartridge packages until you are ready to
Note:
install the ink. Cartridges are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
2
Lift up the scanner unit until it locks into place and remove
all protective materials from inside the product.
Donottouchtheflatwhitecable.
Caution:
cartridges only, not
®
When using telephone equipment, you
3
Lower the scanner unit.
2
Turn on and configure
1
Connect the power cord to the back of the product and to
an electrical outlet.
Do not connect to your computer yet.
Caution:
2
Raise the control panel and turn on the product.
Ifanerrorcodeappears,turnofftheproductand
Note:
check that no protective material has been left inside the
product.
3
Select your language, country, date, and time on the
LCD screen.
You can change these settings later using the
Note:
product's control panel. For more information, see the online
User's Guide.
3
Install ink cartridges
Keep the ink cartridges out the reach of children and do not
Caution:
drink the ink.
The included initial cartridges are designed for reliable printer
Note:
setup and cannot be used as replacement cartridges or resold. After
setup, the remaining ink is available for printing.
1
Lift up the scanner unit until it locks into place.
Advertisement
Related Manuals for Epson WorkForce Pro WF-C4810 Series
Summary of Contents for Epson WorkForce Pro WF-C4810 Series
- Page 1 • Do not use the Epson product near water. • Always keep this guide handy. • Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning.
- Page 2 e ink cartridges, and remove them from the Gently shake th Slide the side edge guides all the way out and set the packaging. front edge guide to the paper size you are using. Insert paper with the glossy or printable side down. Remove only the yellow tape from each ink cartridge.
- Page 3 (Canada) for more information. ink supplies are not compatible and, even if described as compatible, may not function properly or at all. Epson periodically provides * May require the Epson Print Enabler or Mopria Print Service app from firmwareupdatestoaddressissuesofsecurity,performance,minor Google Play™.
- Page 4 EPSON, Epson Smart Panel, and DURABrite are registered trademarks, EPSON Exceed Your Vision is a registered logomark, and Epson Connect is a trademark of Seiko Epson Corporation. Designed for Excellence is a trademark of Epson America, Inc.