Terminal Function Selection - Toshiba Q9 Plus Bypass ASD Installation & Operation Manual
Hide thumbs
Also See for Q9 Plus Bypass ASD:
- Quick start manual (108 pages) ,
- Installation & operation manual (56 pages)
Table of Contents
Advertisement
6.7
Terminal function selection
6.7.1
Keeping an input terminal function always active (ON)
f104 : Always active function selection 1
f108 : Always active function selection 2
f110 : Always active function selection 3
Function
This parameter specifies an input terminal function that is always to be kept active (ON).
[Parameter setting]
Title
f104 Always active function selection 1
Always active function selection 2
f108
Always active function selection 3
f110
Explanation of the coast stop function
When ST (Standby) is OFF, coast stops.
The default setting for ST (Standby) is ON. Please
change the following settings:
(no function)
Assign open input terminal 6: ST (Standby).
Coast stops if terminal set for ST (Standby) is set to
OFF. The monitor on the inverter at this time displays
Note1) Input terminal function 8, 9 (Reset command and its inversion) cannot be assigned.
Function
0-153 (Refer to section 11.6.)
0-153 (Refer to section 11.6.)
0-153 (Refer to section 11.6.)
F-31
Adjustment range
Default setting
0 (No function)
0 (No function)
Coast stop
Motor
speed
F-CC
ST-CC
E6581611
6 (ST)
6
ON
OFF
ON
OFF
Advertisement
Chapters
Table of Contents
