Instructions
The following instructions only apply to right-handed doors. For left-handed doors,
please read [Before installation] carefully and make necessary adjustments.
Mark the hole for drilling with drilling
1
template and drill the marked hole,
then mount the mortise into the hole
and fasten it with anchor screw.
Attention
The mortise cable should through the hole
showed on the picture.
Install the threaded pipes and place
3
the compressed spring and square
shaft into the hole of the lever.
Insert the gourd lock cylinder into
2
the corresponding position and
fasten it with screw.
Pull the connector through the
4
hole and align the square shaft
and threaded pipes on the front
escutcheon with the holes.
Attention
Anti-dismantling component should be flush
against the door or an alert would be triggered
when Philips easykey is electrified.
7