LG LGES-5048 Quick Installation Manual page 3

Hide thumbs Also See for LGES-5048:

Table of Contents

Inverter

1. Terminals at the bottom of the inverter cannot bear much load. Otherwise, the terminals will be

damaged.

2. All labels and warning marks should be clear after the installation. Do not scrawl, damage, or

cover any label on the device.

3. Do not touch the running equipment to avoid being hurt as its temperature may exceed 60℃. Do

not install the equipment at a place within children's reach.

4. Unauthorized dismantling or modification may damage the equipment, the damage is not covered

under the warranty.

5. Do not start the BACKUP function if the inverter is not connected to the battery.

6. Warning labels on the inverter are as follows.

High voltage hazard. Power off

the inverter first before any

operations.

Read through the guide before

any operations.

High-temperature hazard. Do

not touch the equipment to

avoid being burnt.

Check Items Before Switching Power ON

No.

The inverter is firmly installed at a clean place where is well-ventilated and easy-to-

operate.

The PE cable, DC input cable, AC output cable, and communication cable are connected

correctly and securely.

Cable ties are routed properly and evenly, and no burrs.

Unused ports and terminals are sealed.

The voltage and frequency at the connection point meet the on-grid requirements.

Potential risks exist. Wear

proper PPE before any

operations.

Delayed discharge. Wait until

the components are totally

discharged after power off.

5min

Check Item

Table of Contents