Archiving; Card Compatibility; Media Status - ABB SM3000 User Manual
Multipoint videographic recorder
Hide thumbs
Also See for SM3000:
- User manual (137 pages) ,
- Instructions (4 pages) ,
- Replacing instructions (8 pages)
Table of Contents
Advertisement
SM3000
Multipoint Videographic Recorder
5.5 Archiving
Recorded data, logs and configuration files stored on the instrument's internal memory can be archived to files created on removable
media. Parameters for archiving each process groups' data are configured independently.
Note. To configure Archiving, refer to Section 6.5.6, page 85.
5.5.1 Card Compatibility
Our recorders comply with approved industry standards for memory cards. SanDisk Standard Grade memory cards have been fully
tested and are recommended for use with our recorders. Other brands may not be fully compatible with this device and therefore may
not function correctly.
5.5.2 Media Status
Fig. 5.2 Media Status Icons
Note. Do not remove media while either of the media update in progress status icons (
IM/SM3000–EN Rev. L
External archive media not inserted (yellow flashing exclamation mark)
External archive media on-line (green icon, shaded area indicates % used)
External archive media off-line (grey icon, shaded area indicates % used)
External archive media update in progress (see
External media 100% full, archiving stopped (green/red icon, flashing white cross)
Warning! Too many files (green icon – media online, grey icon – media offline)
Too many files, archiving stopped (red icon, flashing yellow cross)
Amount of memory used on the external archive
media currently installed
Approximate time left before the current external
archive media is full, assuming the amount of data
recorded remains the same.
Time Left
Display Format
³1 Day:
Days, e.g. '5 days'
1 Hour, <1 Day:
Hours, e.g. '10 hours'
<1 Hour:
Minutes, e.g. '25 minutes'
below)
Note
or
) are displayed.
5 Setup
45
Advertisement
Table of Contents
