D-Link R15 Technical Support Setup Procedure

Download this manual

Technical Support Setup Procedure

How to Backup/Restore configuration for R15 Router?

Step 1:

Connect your device to the Wi-Fi of the R15 router.

Step 2:

Open a browser and type http://R15-XXXX.local./ or http://192.168.0.1 then press Enter

*XXXX Last 4 digit of the router's mac address

Step 3:

Enter your administrator password.

If you have not changed the default password, check on the configuration card. Click Login.

Page 1 Step 1: Connect your device to the Wi-Fi of the R15 router. Step 2: Open a browser and type http://R15-XXXX.local./ or http://192.168.0.1 then press Enter *XXXX Last 4 digit of the router’s mac address Step 3: Enter your administrator password.
Page 2 Technical Support Setup Procedure BACK UP Go to Management > System Admin > System • Click the Save button across Save Settings to Local Hard Drive • Config.bin will be saved to your Downloads Folder...
Page 3 Technical Support Setup Procedure RESTORE Go to Management > System Admin > System • Click the Select File button across Load Settings from Local Hard Drive • Choose the config.bin from your Downloads Folder • Click Open...
Page 4 Technical Support Setup Procedure Once config.bin is selected • Click Restore • Click Okay...
Page 5 Technical Support Setup Procedure • Wait until restore process is done • Restore configuration file success • Click Okay --END--...