Table of Contents
Advertisement
Building Networks for People
Power on
Make sure all cables are correctly and firmly connected before turning on Video Server. Turn on
cameras, sensors, alarm devices, and then attach the power adaptor of Video Server to the
electric power socket*. After the POST (power-on self test) is complete and the result is
successful, Video Server is ready for software configuration as described in this manual. At this
stage, network speed and video modulation type are automatically detected. If the detection of
video modulation fails, administrators may change the setting on the configuration page. Refer
to the configuration section for further information.
Connect the power jack of the power adapter to Video Server prior to plugging the utility
end into the utility power socket. It will reduce accidental electric surge shock.
DVS-301 User Manual v1.00
7
Advertisement
Table of Contents
