Bootp / Dhcp - Hitachi HX-RIO3 Series User Manual

Hide thumbs Also See for HX-RIO3 Series:

Table of Contents

6.4. BOOTP / DHCP

'IP Address' setting is available for BOOTP / DHCP.

BOOTP: short for Bootstrap Protocol, is a UDP network protocol used by a network client to obtain its IP

address automatically. This is usually done in the bootstrap process of computers or operating systems

running on them. The BOOTP server can assign the IP address from a pool of addresses to each client.

DHCP: set of rules used by communications devices such as a computer, router or network adapter to

allow the device to request and obtain an IP address from a server which has a list of addresses available

for assignment.

(1) Run '[Hitachi] -> [IOGuidePro] -> [Protocol Messenger] -> [Modbus]'

(1) Write the value of each.

•

Protocol :

•

ComPort :

•

Address(Hex) :

•

Function(Dec) :

Modbus TCP, Modbus RTU

User Port / Baudrate : 115200(default)

160B (IP Setting Method Register)

16, Write Multiple registers

HX-RIO3 Series

Table of Contents

Rio3-cp3mbt