Install The Air Baffle - Lenovo ThinkSystem SR550 Maintenance Manual
Hide thumbs
Also See for ThinkSystem SR550:
- Setup manual (120 pages) ,
- Product manual (69 pages) ,
- Manual (66 pages)
Table of Contents
Advertisement
Attention: For proper cooling and airflow, install the air baffle before you power on the server. Operating the
server with the air baffle removed might damage server components.
Install the air baffle
Use this information to install the air baffle.
"Read the
installation
Guidelines" on
page 53
To install the air baffle, complete the following steps:
Watch the procedure
A video of this procedure is available at
C9jFjZnXQ6AmTXaIdX6_HJ
Figure 32. Air baffle installation
Step 1.
Align the air baffle tabs with the slots on both sides of the chassis; then, lower the air baffle into the
server.
Step 2.
Press the air baffle down until it is securely seated.
Note: Close the retaining clip on each end of the DIMM slot before installing the air baffle for
proper cooling.
Step 3.
Install any RAID super capacitor module that you have removed.
Complete the parts replacement. See "Complete the parts replacement" on page 164.
"Power off
for this task"
on page 13
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
the server
Chapter 3
.
Hardware replacement procedures
61
Advertisement
Table of Contents
