Table of Contents
Advertisement
Setting status display mode
While holding down buttons 1, 2 and 3, turn the power
on.
Whey you press a source select button, the system
checks that the designated crosspoint has been
switched, then the lamp lights according to the
crosspoint status.
Setting to 32 (16)-source select mode
While holding down buttons 1 and 4, turn the power
on.
All the source/destination select buttons work as
source select buttons.
Setting to 8-source/8-destination or 16-source/
16-destination select mode 1
While holding down buttons 5 and 6, turn the power
on.
For the BKS-R1608, the select buttons 1 through 8
work as source select buttons, and the select buttons 9
through 16 function as destination select buttons.
For the BKS-R3209, the select buttons 1 through 8,
and 17 through 24 function as source select buttons,
and the select buttons 9 through 16, and 25 through 32
function as destination select buttons.
BKS-R1608
1
2
3
4
5
6
7
8
Source select buttons
BKS-R3209
1
2
3
4
5
6
7
8
17 18 19 20
21 22 23 24
Source select buttons
Setting to 16-source/16-destination select
mode 2
While holding down buttons 5 and 7, turn the power
on.
For the BKS-R3209, the upper select buttons 1 through
16 function as source select buttons, and the lower
select buttons 17 through 32 function as destination
select buttons.
For the BKS-R1607, all select buttons function as
source select buttons.
9
10 11 12
13 14 15 16
Destination select buttons
9
10 11 12
13 14 15 16
25 26 27 28
29 30 31 32
Destination select buttons
Setting to phantom full-protect mode
While holding down buttons 9 and 11, turn the power
on.
If one of the crosspoints set for a phantom is protected,
switching of all the crosspoints of the phantom is
prohibited.
Setting to phantom partial-protect mode
While holding down buttons 9, 10 and 11, turn the
power on.
If one of the destinations set on a phantom is protected,
switching of the crosspoints including the protected
destination is prohibited, but the other crosspoints are
switched.
List of setup operations
Settings
Initialization
Single-use mode
Prompt lamp-light mode
Status display lamp-light mode
32 (16)-source select mode
8-source/8-destination or
16 source/16 destination select mode 1
16 source/16 destination select mode 2
Phantom full-protect mode
Phantom partial-protect mode
Buttons to be
pressed
1, 2
5, 8
1, 3
1, 2, 3
1, 4
5, 6
5, 7
9, 11
9, 10, 11
13 (E)
Advertisement
Chapters
Table of Contents
