Table of Contents
Advertisement
Problem
Noise from
Dishes are loose.
dishwasher
This may be caused by site
Beats in water
installation or cross section
pipe
Dishes are not placed
correctly.
The program is not
powerful enough.
Dishwashing powder is
Dishes remain
not enough.
dirty after
washing
the rotation of spray arm.
Filter assembly is dirty or
not properly installed on the
base, which may impede
the rotation of spray arm.
Add too much dishwashing
Glassware is not
powder under soft water
glossy
conditions.
White point on
Hard water produces more
dishes or
scale.
glassware
Black or grey
Friction between aluminum
imprints on dishes
utensil and dishes.
Dishwashing
Placement of dishes
powder remains in
hinders the addition of
adding position
dishwashing powder.
Placement is improper.
Dishes are taken out too
early.
Dishes are not
completely dry
Program is wrong.
The dishes have poor
drainage ability.
Possible cause
Solutions
Suspend the program and reposition the
dishes.
In case of any doubts, please contact
Please see "Install dishwasher bowl basket"
information for details (Page 22).
Select a more powerful program.
Use more dishwashing powder or replace
new detergent.
Reposition the dishes so that spray arm
can rotate freely.
spray arm.
If soft water is used, use less powder and
select a shorter washing program to clean
the glassware.
Add dishwashing powder.
Use mild detergent to eliminate these
imprints.
Place the dishes correctly.
Please see "Install dishwasher bowl basket"
information for details (Page 22).
Do not take dishes out immediately after
the program ends. Slightly open the door
let the vapor out and wait until dishes are
cool.
When shorter washing procedures are
used, washing temperature is lower and
program shall be selected.
These dishes have poor drainage ability,
which are not suitable to be washed in
dishwasher.
33
- Quick Links:
- Dishwasher Features
- Washing Program
- Error Code
Hide quick links:
Advertisement
Table of Contents
