Bosch Solution 2000 Programming page 9
With the icon keypad
Hide thumbs
Also See for Solution 2000:
- Installation manual (150 pages) ,
- User manual (31 pages) ,
- Quick start manual (4 pages)
Advertisement
2. Specify the user number (1 - 32) you want to delete the code for, e.g.:
3. Press the
[ * ]
button to delete it.
IX. Assign RF Receiver
You must specify the RF receiver to be used if you intend to use RF devices, such as
remote key fobs or wireless detectors — this can be done at location 395.
Options
•
0 = Not Used
•
1 = Use RADION (Solution 3000 only)
•
2 = Use WE800EV2 (Solution 2000)
For example, to assign a RADION B810 as the RF receiver:
1.
Enter programming mode:
2.
Go to the location for receiver assignment:
3.
Select option 1:
4.
Save and exit:
X. Add/Delete RF Key Fobs
Adding a key fob is similar to adding a user code, except that you enter a key fob RFID
number, instead of a PIN code. Additionally, key fob numbers are between the range of
301 - 332, as opposed to 1 - 32 for user codes.
To add a RADION key fob:
1. Make sure you have assigned the RADION receiver.
2. Enter the user
3. Enter the user number (301 - 332) you wish to assign the key fob to, e.g.:
4. Enter the nine-digit RFID number on the key fob, e.g.:
5. Press
[ # ]
to confirm the operation and exit.
To delete a RADION key fob:
1. Enter the user
2. Enter the key fob number (301 - 332) you want to delete, e.g.:
3. Press the
[ * ]
button to delete it.
[
1 2 3 4
[ 1 * ]
[ 9 6 0 # ]
master code
operation:
master code
operation:
# ]
[ 3 9 5 # ]
[
2 5 8 0
1 # ]
[ 1 2 3 4 5 6 7 8 9 # ]
[
2 5 8 0
1 # ]
[ 8 # ]
[ 3 0 1 # ]
[ 3 0 1 # ]
Page !9 of !12
Advertisement
